I started this new build. It will be a dog house install. 
-
-
Here's a shot of the mechanics I will be using... The head on the picture is from a Nimbus 550 but I opted to go SAB all the way and use the stock head. I made the follower from parts I had. Head rotation will be CCW using a 1st gen Goblin 700 pulley, main shaft from a Logo 690. Motor is Egodrift 4030HT-400, esc Aureus 105 governed by iKon2. Servos are mini KST X15 25kg and tail will be standard size 760us 560hz. -
There will be a ot of woodwork to do in order to make the upper fuselage stiff enough for the dog house installComment
-
Just for size, FK & Roban.Comment
-
Only cosmetics left to do. Mechanics are functional and tail servo/linkage installed. I paid special attention to installing the tail rotor shaft as high as possible in line with the tunnel of the full-size aircraft. This is an experiment for further builds. Also, main and tail rotors are turning in the scale direction.Comment
-
Roban, Marvel-Craft/Fusuno, Fun-key.Comment
-
Looking good, love the 407 but still don't have one yet, I will do a 700 Roban Super Scale 407 if I do get one, I like the Sheriff version or one like yours.Comment
Comment