FlyWing X-Wing Fighter

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • xviper
    replied
    Originally posted by SgtRay

    Nice I can't wait to see the pic. But that 90 bend looks too big...
    I'm afraid you may be correct. As soon as I took it out of the bag, I thought the same. I have another one on order that's quite a bit smaller. We'll see.

    Leave a comment:


  • SgtRay
    replied
    Originally posted by xviper
    This is the extension. Just got it. Will install soon and take a photo. Click image for larger version

Name:	IMG_5935.jpg
Views:	201
Size:	76.7 KB
ID:	452474
    Nice I can't wait to see the pic. But that 90 bend looks too big...

    Leave a comment:


  • xviper
    replied
    This is the extension. Just got it. Will install soon and take a photo. Click image for larger version

Name:	IMG_5935.jpg
Views:	201
Size:	76.7 KB
ID:	452474

    Leave a comment:


  • SgtRay
    replied
    Originally posted by xviper
    I have a small USB-C extension on the way. I plan to have an external connection point so I can download the video from the onboard camera directly without having to remove the cockpit every time. Your 4K video proved that the quality and resolution is superb.
    Thanks I look forward to see the USB set up!

    Leave a comment:


  • xviper
    replied
    Another informative video. It answered a couple questions for me that was running through my head.
    I have unlocked "beginner mode" so I can do rolls and loops and fly lower. Haven't flown it that way yet due to weather. I also took out the screws for the canopy so I can take it off when I fly. I put it on for carrying in the suit case to protect the stuff in the cockpit.
    Out of precaution due to the reports of the battery falling out and the wings folding in flight, I devised some simple locking mechanisms for the battery (to prevent the lock from moving) and the wing locks (to prevent the release buttons from moving). I have a small USB-C extension on the way. I plan to have an external connection point so I can download the video from the onboard camera directly without having to remove the cockpit every time. Your 4K video proved that the quality and resolution is superb.

    Leave a comment:


  • SgtRay
    replied
    Hey LOOK Ma!! No canopy!!

    Leave a comment:


  • SgtRay
    replied
    I know the feeling!

    Leave a comment:


  • xviper
    replied
    Did the maiden this morning. A friend did a short video using his Iphone in the middle of the flight. And one of the video from the goggles. I'm glad I didn't push hard for a refund. This thing is everything I hoped it would be. It's really interesting to see fly and the friends who put on the goggles said it was an amazing experience. High clarity, resolution and big WOW factor. The transition is the best of any of the VTOLs I've ever flown. It is smooth, precise and extremely controlled. I'm still devising ways to make it more "bomb proof", like securing the battery so it doesn't fall out during flight and a locking mechanism so the wings don't fold, as reported by some owners. When I get familiar with the control responses, I'll start flying with the goggles and defeat the nannies (ie, beginner mode). Another few short flights ought to do it.



    Leave a comment:


  • SgtRay
    replied
    Originally posted by xviper
    Just arrived. Total 44 days from purchase, 5 days from “Label Created”. Not bad at all. Didn’t need to be as pessimistic as I was.
    Click image for larger version

Name:	IMG_5912.jpg
Views:	435
Size:	128.5 KB
ID:	452162
    Now I can't wait!

    Leave a comment:


  • Evan D
    replied
    Awesome!

    Leave a comment:


  • xviper
    replied
    Just arrived. Total 44 days from purchase, 5 days from “Label Created”. Not bad at all. Didn’t need to be as pessimistic as I was.
    Click image for larger version

Name:	IMG_5912.jpg
Views:	435
Size:	128.5 KB
ID:	452162

    Leave a comment:


  • Ara
    replied
    Originally posted by xviper
    Sorry to hear of your troubles. I can understand how frustrating this must be. I sent my first email asking for an immediate refund, to which they replied that they want more time to find a way to ship it to me. It took a total of 3 "tries" before they actually shipped it. I believe most of the returns by China Customs were from USA orders. For whatever reason, they stalled shipping for me in Canada. I think they likely had to most sales from the US and they tried to get those out first. Tried to ship out too many at once. China Customs in the mainland seemed to have more stringent interpretations of customs regulations of other countries. I posted on their VIP Facebook page that perhaps it would be a better idea to get these things to Hong Kong first before trying to push them through customs and maybe to NOT declare them as "drones". Don't know if they listened but I believe that's why mine had more success on the first attempt than previous ones that went thru customs in the mainland. Mine has now cleared China Customs and UPS has it and they are probably waiting for their next air freight flight to be scheduled before leaving Hong Kong airport. I've even paid the UPS brokerage fee.

    My only suggestion to you is to send one last email to them asking for a FULL REFUND and if you don't hear within one week, you should file a dispute with PayPal (if that's how you paid) or go to your CC company and get the charge reversed due to inability to complete shipping. It's always taken them about a week to respond to any of my emails. Time difference and being busy, I suspect. My emails have always gone to "sales@flywingrc.com".
    Thanks your thoughts and input!
    Enjoy your Xwing… it’s practically knocking on your door :)
    Hope things go well for my order as well !
    Keeping my fingers crossed 🤞 🤞🤞

    Leave a comment:


  • xviper
    replied
    Originally posted by SgtRay

    You know now that I think about it I pushed the right stick all the way to the left but I didn't do the yank. LOL I would imagine it would have worked but now that I think about it I didn't pull on the stick. I just put the right stick hard left and then I slowly increase the left stick to the left to turn it. But when it was in Acura I don't see why I couldn't have pushed the right stick to the left and then pull back on it. Next time I fly it I will definitely check that off my box. Along with being my second flight I think it was only maybe my fourth flight of anything this year
    "Bank and yank" won't be as noticeable when the X is in the mode that coordinates the turns. It may already use a combination of yaw and pitch. If you "yank" too aggressively on a "plank", it can stall easily. On the X, the nanny might not allow that to happen. Worth a try but do it up high. When I had the old Blade QX3 quad. I'd be going fast forward, bank and pull the right stick down all the way suddenly and all it did was a backwards somersault while leaned over.

    Leave a comment:


  • SgtRay
    replied
    Originally posted by xviper
    EXCELLENT! During your "hard turns", you said you could make the turning radius smaller by using some rudder. Could this have been accomplished by using elevator? IE, As in fixed wing when people do "bank and yank"?
    You know now that I think about it I pushed the right stick all the way to the left but I didn't do the yank. LOL I would imagine it would have worked but now that I think about it I didn't pull on the stick. I just put the right stick hard left and then I slowly increase the left stick to the left to turn it. But when it was in Acura I don't see why I couldn't have pushed the right stick to the left and then pull back on it. Next time I fly it I will definitely check that off my box. Along with being my second flight I think it was only maybe my fourth flight of anything this year

    Leave a comment:


  • xviper
    replied
    Originally posted by SgtRay
    Here is my last flight for the AMA day event:

    Took "The Wraith" out to the Las Cruces flying field for their AMA Celebration Day, and this time the training wheels are off. I removed the nanny altitude limiter so we could actually see what this bird can do down low—despite the constant "Low Altitude!" warnings screaming in my ear.
    EXCELLENT! During your "hard turns", you said you could make the turning radius smaller by using some rudder. Could this have been accomplished by using elevator? IE, As in fixed wing when people do "bank and yank"?

    Leave a comment:


  • SgtRay
    replied
    Here is my last flight for the AMA day event:

    Took "The Wraith" out to the Las Cruces flying field for their AMA Celebration Day, and this time the training wheels are off. I removed the nanny altitude limiter so we could actually see what this bird can do down low—despite the constant "Low Altitude!" warnings screaming in my ear.

    Leave a comment:


  • xviper
    replied
    Originally posted by Ara

    Hello… You are lucky that someone responded at all….
    It has now been 8 days since my order was sent back by Chinese customs and tracking shows Flywing has received it!
    Despite me writing numerous times to the few contacts at FW available at their website …. No one has bothered to even acknowledge the receipt of my emails .. Let alone explain and offer what my options are >:[….
    I ordered mine right ofter july release date.. and i live in CA USA…..
    I have no idea what else i can do!
    Very concerning !!!!
    Sorry to hear of your troubles. I can understand how frustrating this must be. I sent my first email asking for an immediate refund, to which they replied that they want more time to find a way to ship it to me. It took a total of 3 "tries" before they actually shipped it. I believe most of the returns by China Customs were from USA orders. For whatever reason, they stalled shipping for me in Canada. I think they likely had to most sales from the US and they tried to get those out first. Tried to ship out too many at once. China Customs in the mainland seemed to have more stringent interpretations of customs regulations of other countries. I posted on their VIP Facebook page that perhaps it would be a better idea to get these things to Hong Kong first before trying to push them through customs and maybe to NOT declare them as "drones". Don't know if they listened but I believe that's why mine had more success on the first attempt than previous ones that went thru customs in the mainland. Mine has now cleared China Customs and UPS has it and they are probably waiting for their next air freight flight to be scheduled before leaving Hong Kong airport. I've even paid the UPS brokerage fee.

    My only suggestion to you is to send one last email to them asking for a FULL REFUND and if you don't hear within one week, you should file a dispute with PayPal (if that's how you paid) or go to your CC company and get the charge reversed due to inability to complete shipping. It's always taken them about a week to respond to any of my emails. Time difference and being busy, I suspect. My emails have always gone to "sales@flywingrc.com".

    Leave a comment:


  • Ara
    replied
    Originally posted by xviper
    UPDATE: Asked for a refund a few days ago. Just got a reply this morning. They are saying they are going to try another way to get this thing to me in Canada. I guess they're hoping Canada has less restrictions for such products. The next few days will tell.

    On the X-Wing Facebook group, someone from FlyWing posted that they are asking those with standing orders to be more patient as they continue to work on getting around the China customs situation.
    Hello… You are lucky that someone responded at all….
    It has now been 8 days since my order was sent back by Chinese customs and tracking shows Flywing has received it!
    Despite me writing numerous times to the few contacts at FW available at their website …. No one has bothered to even acknowledge the receipt of my emails .. Let alone explain and offer what my options are >:[….
    I ordered mine right ofter july release date.. and i live in CA USA…..
    I have no idea what else i can do!
    Very concerning !!!!

    Leave a comment:


  • xviper
    replied
    Originally posted by Evan D
    Wishing you the best!
    Much appreciated.

    Leave a comment:


  • Evan D
    replied
    Wishing you the best!

    Leave a comment:

Working...