A3 pro gyro

[Waiting to crash]

So there is only one spot for elirons but my plane has two servos how do I hook it up or can I even hook it up

[NewbieBob]

You need to use a Y connector cable that joins both ailerons together and ends up with one plug for the receiver

[Waiting to crash]

That won't work if I do that both elir will work in the same direction

[Waiting to crash]

Remember there are two servos which means two channels eliron and Axl 1

[Evan D]

Then you can’t use that gyro. If they can’t be Y’d then no gyro nor one that can do flaperons.

[NewbieBob]

Reverse one aileron servo before connecting to the Y harness or flip the one servo over if possible.

[NewbieBob]

If one servo is on its left side and the other on its right side they will move opposite to each other

[Waiting to crash]

So I do away with the axl channel split the eliron and reverse say the left servo and I should b good

[NewbieBob]

Yup. If they are on opposite sides they will already move differently and just the Y cable should do the trick.

[Waiting to crash]

Thanks that makes sense

[NewbieBob]

Good Luck. Keep us posted

[kallend]

If you need to have 2 aileron channels (for example, for differential or spoilerons/flaperons) then you need the Hobbyeagle A3S4, which has independent inputs and outputs for 2 aileron and 2 elevator channels.