I want to connect a remote aerial to the SRXL2 port on my AR10360T receiver. It’s a 3 pin connector but a 4 pin port. Do I need an adapter? The 3 pin will fit but it’s a question of which side of the port to fit it.
Attached Files
-
-
My understanding is you can't put a satellite into that port, only a remote receiver. I would ask in the radio section of RCG. -
Sorry yes, I meant remote receiver.Comment
-
Again I would ask but maybe this will help. One pin is not used.
57601.2 Spektrum DSMX Serial Race Receiver V2 Manual_MULTI.indbComment
-
Older (3 pin) remotes don't work with the AR10360T, they use a different protocol. They changed to a 4 pin plug to prevent people from trying.
You need a remote like a SPM9747 or a SPM4651T which come with the correct cable.Comment
-
Ok thanks very much, I’ll get one of those. Trouble is, it’s a big old 19.2 lb Hangar 9 Spit which I bought off somebody and the remote is hidden somewhere in the wing, so I’ll have to try and remove it. Think it’s some kind of Lemon remote.Comment
Comment