Easy removal of paint on surfaces to glue

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Bill
    Member

    • Dec 2013
    • 129
    • Send PM

    #1

    Easy removal of paint on surfaces to glue

    I have found an easy way to remove paint from foamy surfaces without sanding. This is especially helpful in small hard to reach areas.
    Cover the painted surface with plain old Scotch Tape and wait about 30 minutes. When you remove the tape, most of the paint will peal off also. For large areas, a wide type packing tape will work. 
  • Grossman56
    Dangerous Dan *HobbySquawk Moderator*

    • Jun 2014
    • 7333
    • Cody, Wyoming
    • Send PM

    #2
    RE: Easy removal of paint on surfaces to glue

    There you go, Bill.  Especially in the hard-to-get-at places.
    Sounds like you're planning to paint, keep us informed!

    Grossman56
    Team Gross!

    Comment

    • hick20
      Member

      • Feb 2015
      • 26
      • Send PM

      #3
      RE: Easy removal of paint on surfaces to glue

      Originally posted by Grossman56
      There you go, Bill.  Especially in the hard-to-get-at places.
      Sounds like you're planning to paint, keep us informed!

      Grossman56
      good idea!

      Comment

      • rc-eflyer
        Member

        • Feb 2015
        • 210
        • Send PM

        #4
        RE: Easy removal of paint on surfaces to glue

        Originally posted by Bill
        I have found an easy way to remove paint from foamy surfaces without sanding. This is especially helpful in small hard to reach areas.
        Cover the painted surface with plain old Scotch Tape and wait about 30 minutes. When you remove the tape, most of the paint will peal off also. For large areas, a wide type packing tape will work. 
        Good tip, thanks

        Steve
        AMA 95495
        Freewing P-51D Iron Ass
        Freewing F-86 80MM

        Comment

        • Rocketeer
          Senior Member

          • Feb 2014
          • 1356
          • Send PM

          #5
          RE: Easy removal of paint on surfaces to glue

          Greetings Bill,

          Thanks!!

          I have used this method of paint removal and it does indeed help.

          Keep these helpful tips coming as we're always open to one of those "why didn't I think of that!" moments.


          Clear Skies,

          Bill L.
          in Okla.

          Comment

          • doctormike
            HobbySquawk Moderator

            • Oct 2013
            • 1260
            • Santa Fe NM
            • Send PM

            #6
            RE: Easy removal of paint on surfaces to glue

            3M packing tape even works better. I also use it to remove those pesky non-scale stickers. It also works great to remove ultra coat from balsa/ply ARF's. The Doctor

            Comment

            • Grossman56
              Dangerous Dan *HobbySquawk Moderator*

              • Jun 2014
              • 7333
              • Cody, Wyoming
              • Send PM

              #7
              RE: Easy removal of paint on surfaces to glue

              I used it to pull off the window decals on Pandora One, did a great job!

              Grossman56
              Team Gross!

              Comment

              • ServiceRep
                Member

                • Feb 2015
                • 2
                • Send PM

                #8
                RE: Easy removal of paint on surfaces to glue

                I have tried a lot of different tapes to remove stickers and paint from foamies. The one that works the best is Clear Gorilla tape. Most other tapes work OK, even the regular black Gorilla tape works OK on the easy to remove stickers.

                For the stickers and paint that is tough to get off use the Clear Gorilla tape. Just firmly press a piece of tape starting on the edge of the sticker and slowly peal the tape back over itself. No need to wait to start pealing.

                Sometimes when removing paint some paint will remain in the ripples of the foam. Use denatured alcohol and paper towels to dissolve and remove it. Denatured alcohol and Clear Gorilla tape is available in the paint department at Home Depot. Rubbing alcohol usually has a lot of water in it and does not work as well. Alcohol will not harm foam.
                Landing is mandatory!

                Comment

                Working...