Roban - World Class Scale Helicopters

You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

All us newbie pilots, lets share..

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RE: All us newbie pilots, lets share..

    Yes, I just used it on the low setting and kept it moving with my hand close enough to feel the temp of the heat, sunny day temp works great.

    In the meantime, the wind is up in Cody, a little stiffer than I wanted for a maiden flight for the Pitts, so I'm holding off.  Meanwhile, took the Waco up in it, it was actually a head wind so she took off like a shot.  I think I zeroed in on her last problem today.  For some reason, only known to her evil mind, she needed full right aileron trim to fly level, so I brought her around and checked it out and adjust the trim back to neutral and went into the radio's sub trim.  Adjusted the sub trim so that it was duplicating the correction I did with the top trim and adjusted the rudder trim so it was neutral as well.  Blasted back into the air and she flew like a dream, very Pandora-like, which is a good thing.  She, being such a small bird inside, doesn't have an A3L (one of the very few birds of mine that doesn't) so she gets rocked a little in the wind, which is okay, just more work for me, but she landed great both times and behaved herself like a lady and didn't insist on flopping over on her back like some dead insect.  Do I dare say that I have tamed the beast!?

    We tried the Apprentice but the wind was just too much, Diane had over half throttle just to maintain forward momentum and did a Harrier landing.
    Note to self, we're coming up to 50,000 reads on this thread, and I'm coming up to one thousand posts, time to celebrate!!

    Grossman56
    Team Gross!

    Comment


    • RE: All us newbie pilots, lets share..

      Originally posted by Grossman56
      Yes, I just used it on the low setting and kept it moving with my hand close enough to feel the temp of the heat, sunny day temp works great.

      In the meantime, the wind is up in Cody, a little stiffer than I wanted for a maiden flight for the Pitts, so I'm holding off.  Meanwhile, took the Waco up in it, it was actually a head wind so she took off like a shot.  I think I zeroed in on her last problem today.  For some reason, only known to her evil mind, she needed full right aileron trim to fly level, so I brought her around and checked it out and adjust the trim back to neutral and went into the radio's sub trim.  Adjusted the sub trim so that it was duplicating the correction I did with the top trim and adjusted the rudder trim so it was neutral as well.  Blasted back into the air and she flew like a dream, very Pandora-like, which is a good thing.  She, being such a small bird inside, doesn't have an A3L (one of the very few birds of mine that doesn't) so she gets rocked a little in the wind, which is okay, just more work for me, but she landed great both times and behaved herself like a lady and didn't insist on flopping over on her back like some dead insect.  Do I dare say that I have tamed the beast!?

      We tried the Apprentice but the wind was just too much, Diane had over half throttle just to maintain forward momentum and did a Harrier landing.
      Note to self, we're coming up to 50,000 reads on this thread, and I'm coming up to one thousand posts, time to celebrate!!

      Grossman56
      Diane needs to get on here so we can gab a bit!
      Lauren

      Comment


      • RE: All us newbie pilots, lets share..

        I'll have to see if she will, good idea though.  Trying to get her off Farmville will be a challenge though!!  LOL

        Grossman56
        Team Gross!

        Comment


        • RE: All us newbie pilots, lets share..

          Originally posted by Grossman56
          I'll have to see if she will, good idea though.  Trying to get her off Farmville will be a challenge though!!  LOL

          Grossman56
          Hahaha!!!! It's addictive :)
          Lauren

          Comment


          • RE: All us newbie pilots, lets share..

            Originally posted by Flygirl
            Originally posted by Grossman56
            I'll have to see if she will, good idea though.  Trying to get her off Farmville will be a challenge though!!  LOL

            Grossman56
            Hahaha!!!! It's addictive :)
            Hello Lauren.....
            I'm not on Farmville :P
            Mrs Grossman

            Team Gross

            Comment


            • RE: All us newbie pilots, lets share..

              Originally posted by Mrs Grossman
              Originally posted by Flygirl
              Originally posted by Grossman56
              I'll have to see if she will, good idea though.  Trying to get her off Farmville will be a challenge though!!  LOL

              Grossman56
              Hahaha!!!! It's addictive :)
              Hello Lauren.....
              I'm not on Farmville  :P
              High 5 Diane!!! It's nice to meet another estrogen based human on here! LOL!!! Congrats on your flying! Gman says you're doing great!
              Lauren

              Comment


              • RE: All us newbie pilots, lets share..

                Thanks!
                Well, at least I haven't totaled my plane yet...
                Still getting over the fear of flying but I am doing it with the help of the Apprentice.
                [hr]
                I do have to admit that Mr Grossman is the most patient teacher I have ever met....lol
                Mrs Grossman

                Team Gross

                Comment


                • RE: All us newbie pilots, lets share..

                  Hey Gang, 50509 reads on this thread!!! Time to pop the cork!!

                  Grossman56
                  Team Gross!

                  Comment


                  • RE: All us newbie pilots, lets share..

                    Thank you all for the congrats!
                    I do appreciate it :P
                    Mrs Grossman

                    Team Gross

                    Comment


                    • RE: All us newbie pilots, lets share..

                      Greetings Mr. and Mrs. G

                      Welcome aboard Mrs. G !!!!

                      I think you guys are our first official forum couple!!!

                      Pretty cool.

                      Bill L,
                      In Okla.

                      Comment


                      • RE: All us newbie pilots, lets share..

                        Welcome to the world of wackos Gman Chick  :D :D :D  


                        Bryan 
                        But Crashing is Landing

                        Comment


                        • RE: All us newbie pilots, lets share..

                          Originally posted by Mrs Grossman
                          Thanks!
                          Well, at least I haven't totaled my plane yet...
                          Still getting over the fear of flying but I am doing it with the help of the Apprentice.

                          [hr]
                          I do have to admit that Mr Grossman is the most patient teacher I have ever met....lol
                          That's a good thing!
                          Lauren

                          Comment


                          • RE: All us newbie pilots, lets share..

                            Greetings Mrs. G,

                            Don't sweat it..... the fear gets renewed with every new planes' maiden flight.

                            Just have fun.... planes are only things, and things can be repaired/replaced.

                            Heat and Pressure creates Diamonds!!


                            Bill L.
                            In Okla.

                            Comment


                            • RE: All us newbie pilots, lets share..

                              Hey guys, anyone have any experience with flite metal?
                              Just curious because I'd love to have an authentic looking aluminum finish and this seems to be the way a lot of guys go.  Looks to be similar to metallic tape and it states that it is aluminum
                              http://www.flitemetal.com/
                              Just curious as to whether anyone here has tried it and what they thought of it.

                              Grossman56
                              Team Gross!

                              Comment


                              • RE: All us newbie pilots, lets share..

                                Greetings GMan,

                                Sorry Buddy, can't help you there.

                                Bill L.
                                In Okla.

                                Comment


                                • RE: All us newbie pilots, lets share..

                                  Originally posted by Grossman56
                                  Hey guys, anyone have any experience with flite metal?
                                  Just curious because I'd love to have an authentic looking aluminum finish and this seems to be the way a lot of guys go.  Looks to be similar to metallic tape and it states that it is aluminum
                                  http://www.flitemetal.com/
                                  Just curious as to whether anyone here has tried it and what they thought of it.

                                  Grossman56
                                  We use to use it on full size aircraft we called it speed tape as it was rated for high speed . It had a self adhesive back and once applied it would not come off and it was aircraft grade aluminum and fairly thick. This would not be good for rc planes but the aluminum tape you can find in any hardware store in the head section works great and is very light weight aluminum. I have used it it works great.

                                  Comment


                                  • RE: All us newbie pilots, lets share..

                                    Hey Boomer, on looking at the site, it says that this product is .0018 inch thick and weighs .0022222 oz per square inch and apparently will stretch a 1/4 inch so it'll go around contours.  There's quite a few pics of guys who have used it and the planes are beautiful.
                                    Perhaps they have two different types??

                                    Grossman56
                                    Team Gross!

                                    Comment


                                    • RE: All us newbie pilots, lets share..

                                      Hey G man,

                                      Looks like your right it's thinner and lighter than speed tape so it wold probably work pretty good. Good flying !

                                      Roy B.

                                      Comment


                                      • RE: All us newbie pilots, lets share..

                                        Thanks Roy, just trying to be cautious as I was warned about radio interference, they talk about that on the site as well, apparently the 2.4ghz(?) that we fly is not affected by it and that was my main worry, who wants to do all that work just to lawn dart.  Now the question is what to apply it on (new plane?!) and how to convince the wife.......

                                        Grossman56
                                        Team Gross!

                                        Comment


                                        • RE: All us newbie pilots, lets share..

                                          Hey guys and gals, OV10 just put me onto these little miracles,
                                          http://smallpartscnc.com/index.php?r...product_id=193
                                          For anyone with an FMS 1400mm warbird, check these out, I just ordered four sets, a set covers one retract so you need two for each bird, but wow, this is what wer were hoping to find.

                                          Grossman56 
                                          Team Gross!

                                          Comment

                                          Working...
                                          X