Glue for securing servos in foamies

[Bill]

Glue recommendations for securing servos in the little compartments of foamies?
Thanks, Bill

[Lon]

Re: Glue for securing servos in foamies

For just securing the servos. I've found the servo tape has worked just fine. No issues....yet....I frequently check them.

[Rocketeer]

Re: Glue for securing servos in foamies

Greetings Bill.

I agree, servo tape does the job quite nicely.
I and I'm sure many others have also used hot glue at times as well.
Although I would recommend the newer "Cold" hot glue.

Servo tape leads the pack though.

Clear Skies

Bill L.
in Okla.

[Bill]

Re: Glue for securing servos in foamies

Thanks guys, I appreciate it.
Bill

[StarHopper]

Re: Glue for securing servos in foamies

First wrap the servo with blue painter's tape (provides texture for 'grab'), then secure in place with a pea-sized dab of hot glue.
Makes future replacement a breeze - the tape peels away cleanly from the servo & you can get at the hot glue & remove; rubbing alcohol will dissolve it, no damage to the foam.

[Bill]

Re: Glue for securing servos in foamies

Thanks.

On Tue, Sep 16, 2014 at 5:04 PM, StarHopper [via Motion RC Forum] <
ml-node+s1075610n3889h8@n5.nabble.com> wrote:

> First wrap the servo with blue painter's tape (provides texture for
> 'grab'), then secure in place with a pea-sized dab of hot glue.
> Makes future replacement a breeze - the tape peels away cleanly from the
> servo & you can get at the hot glue & remove; rubbing alcohol will dissol=
ve
> it, no damage to the foam.
>
>
>
>
>
>
> ------------------------------
> If you reply to this email, your message will be added to the discussion
> below:
>
> http://motion-rc-forum.1075610.n5.nabble.com/Glue-for-securing-servos-in-=
foamies-tp3829p3889.html
> To unsubscribe from Glue for securing servos in foamies, click here
> <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?ma=
cro=3Dunsubscribe_by_code&node=3D3829&code=3Ddy5lL mJlYXNsZXlAZ21haWwuY29tfD=
M4Mjl8LTg1MzAzNzQ0MA=3D=3D>
> .
> NAML
> <http://motion-rc-forum.1075610.n5.nabble.com/template/NamlServlet.jtp?ma=
cro=3Dmacro_viewer&id=3Dinstant_html%21nabble%3Aem ail.naml&base=3Dnabble.na=
ml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabbl=
e.view.web.template.NodeNamespace&breadcrumbs=3Dno tify_subscribers%21nabble=
%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nab=
ble%3Aemail.naml>
>

[doctormike]

RE: Glue for securing servos in foamies

I use Liquid Nails Projects repair adhesive on my foamies now. It is white, paintable, can be sanded, slightly flexible, and can be easily cut for removal. It also washes up with water. It does take a little while to cure. Very strong. The Doctor