1/20 Scale U-2R (3D Printed)

[Prowler901]

Nice work!

[MikeT]

Sized for a 90-100mm, Getting to printing it shortly after I make some final scale tweaks to the model that I overlooked originally.

Are you doing a thread on the Buckeye?

Mike

[Dirty Dee]

Are you doing a thread on the Buckeye?

Mike

There is one on rcgroups in the scratchbuilt edf section. Last updated in April, but will revive it in a few days

[rlcamden]

So, after a couple of years on and off on working with this model, I was finally able to get it printed and flew the maiden +1 today. I settled for Polymaker Polylight ASA. Using the supplied Gcodes, I modified the file for the print temps of 260 for the nozzle and 105 for the bed. Printed on a Prusa MK3S+ with a satin sheet and glue stick for first layer bonding. Turned out perfect. Only thing I done differently was used the Freewing F-22 High Performance 40A ESC from MotionRC. As for the EDF, turbines-rc.com still had a few at last check. Flight video at https://youtu.be/zUF-o2JcDuU

[Elbee]

rlcamden, Bravo Zulu, Sir. Outstanding work. Good flight video, too. Best, LB