You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

New E-Flite 80mm F-18

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #81
    Also wanted to verify Flap to Elevator travel. Many on RCG have stated they are setting Elev at 5mm from Neutral. Is the parting line the neutral point? I put a bubble level on my Elev and it is exactly 5mm from the parting line? Is everyone adding an additional 5mm or would my setup be correct?


    Click image for larger version  Name:	Flap.JPG Views:	0 Size:	95.1 KB ID:	260119

    Comment


    • #82
      I had some elevator horns 3D printed. Much more secure than the stock setup.

      Comment


      • #83
        I put the Xfly unit in my plane and it has transformed the plane... I can actually putt around at 1/4 throttle and the plane doesn't want to fall out of the sky! Its part throttle performance is incredible now and I don't need full throttle hardly at all anymore! Flight times have increased as a result and its just much more enjoyable to fly! Still using stock esc and either an HRB 6s 50c 6000 or CHNL 6s 30c 6200. Over 4 mins flight time for my flying style...
        Check me out on youtube at https://www.youtube.com/user/gooniac33
        I am an RC addict and innovator that loves to share my knowledge with those that need help. Ask me anything via PM if you need help! Check out my Website here https://www.gooniac33.me/

        Comment

        Working...
        X