RE: Freewing F-104 Starfighter
Very impressive performance. What is the weight of that fan?
Official Freewing 70mm F-104 Thread
Collapse
X
-
RE: Freewing F-104 Starfighter
This morning's flight testing the EDF Hobbies 12 blade inrunner. This jet takes verticals to new heights; it's almost scary. Seems to be the strongest fan I've tested so far out of the 13 and 14 blade fans I've already used.
Leave a comment:
-
RE: Freewing F-104 Starfighter
First flight with XRP 70mm inrunner fan
Leave a comment:
-
RE: Freewing F-104 Starfighter
Here's a pic on the afterburner LED covered with a styrofoam bowl cut-out.
Leave a comment:
-
RE: Freewing F-104 Starfighter
Second flight this morning
Leave a comment:
-
Leave a comment:
-
RE: Freewing F-104 Starfighter
Originally posted by Alpha.MotionRCHey URRL, would you mind posting more information on your LED afterburner ring setup? It looks great!
https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=41696
Simply glued to the back of the exhaust once it was lightly sanded. I chose the option of pasting on a cut-out from a white styrofoam plate to diffuse the individual LED lights.Leave a comment:
-
RE: Freewing F-104 Starfighter
Hey URRL, would you mind posting more information on your LED afterburner ring setup? It looks great!Leave a comment:
-
RE: Freewing F-104 Starfighter
Motion RC now has parts for the F104 :DLeave a comment:
-
RE: Freewing F-104 Starfighter
Sorry to see your F104 have an incident, but at least the damage wasn't bad at all. Any idea why the fan failed? I have to admit, I am really liking that Starfighter. Once I get a bit better at flying EDFs, I will have to give that one a try!Leave a comment:
-
RE: Freewing F-104 Starfighter
WOW, not that much damage, that was close!Leave a comment:
-
RE: Freewing F-104 Starfighter
Blew out my brand new 14 blade motor for some reason and had a crash landing but it's back together now with the stock fan. I have a 13 blade XRP 6S fan on order.
https://www.youtube.com/watch?v=0h1H0pLG1Ug&feature=youtu.beLeave a comment:
-
Leave a comment:
-
RE: Freewing F-104 Starfighter
Another early morning 14 blade flight
Leave a comment:
-
RE: Freewing F-104 Starfighter
I like the sound of the newly installed 14 blade fan/motor combo with 100A ESC:
https://www.youtube.com/watch?v=x0J78_goZ4I&feature=youtu.be
http://edfhobbies.com/index.php?route=product/product&path=77_78&product_id=402
http://www.hobbypartz.com/07e-flyfun-100a.htmlLeave a comment:
-
RE: Freewing F-104 Starfighter
Looks great! Always have had a soft spot for the F104, but I never thought an RC version would be viable due to the little wings and long fuselage. I thought it would be very unstable and difficult to fly. You make it look easy my friend! Keep it going!Originally posted by urrlSaturday morning's flight.
https://www.youtube.com/watch?v=8Qj48CF2TRc
Today I replaced the 12 blade with a 14 blade and upgraded to a 100A ESC plus an external BEC in case a malfunction occurs. Hoping for more whoosh. Possible test flight tomorrow.Leave a comment:
-
RE: Freewing F-104 Starfighter
Saturday morning's flight.
https://www.youtube.com/watch?v=8Qj48CF2TRc
Today I replaced the 12 blade with a 14 blade and upgraded to a 100A ESC plus an external BEC in case a malfunction occurs. Hoping for more whoosh. Possible test flight tomorrow.Leave a comment:
-
RE: Freewing F-104 Starfighter
The spare parts shipped at the same time that the aircraft did, but they were in different containers. Unfortunately, the spare parts container was delayed by a Customs inspection, over which we have zero control. The good news is we should receive that container in about two weeks. Like all our products, we strongly emphasize spare parts support and endeavor to maintain sufficient inventory to support our customers' needs.Leave a comment:
-
RE: Freewing F-104 Starfighter
My concern is that I don't see any parts support. Is this still in pre-production status? When do you expect full production and part support? And I hoping there will be other liveries, like maybe a Tiger gamesLeave a comment:


Leave a comment: