Kit-Plus?
Any idea when we might see the kit-plus in stock again?
John
Official Freewing 70mm F-104 Thread
Collapse
X
-
RE: Freewing F-104 Starfighter
Hellava flight(s),Originally posted by urrlMorning flights
Was it just me or was the F-14 real roll sensitive in those turns?
Keepem coming, ChrisLeave a comment:
-
Leave a comment:
-
RE: Freewing F-104 Starfighter
One of the coolest and best sounding aircraft ever!! Even though it's just the turbine sound, I still want it!! Especially with an 90-20. (Top-landing speed)Leave a comment:
-
Leave a comment:
-
RE: Freewing F-104 Starfighter
At 45C The 2.5 minute flight left the battery slightly warm and the remaining voltage was 23.5 volts as I remember. With only a 70mm EDF I find these results typical.Originally posted by CTWhat c rating Lipo are you using with the Cyclone? My only experience with a Cyclone EDF Motor is it discharges at a very high level, and left the Bat very hot. If you are not using a quality Lipo with a high C rating it will not last long.Originally posted by urrlFirst jet I've ever owned with a thrust ratio of at LEAST 1:1
Using EDF Hobbies 12 blade inrunner
http://edfhobbies.com/index.php?route=product/product&product_id=455
ChrisLeave a comment:
-
RE: Freewing F-104 Starfighter
What c rating Lipo are you using with the Cyclone? My only experience with a Cyclone EDF Motor is it discharges at a very high level, and left the Bat very hot. If you are not using a quality Lipo with a high C rating it will not last long.Originally posted by urrlFirst jet I've ever owned with a thrust ratio of at LEAST 1:1
Using EDF Hobbies 12 blade inrunner
http://edfhobbies.com/index.php?route=product/product&product_id=455
ChrisLeave a comment:
-
RE: Freewing F-104 Starfighter
First jet I've ever owned with a thrust ratio of at LEAST 1:1
Using EDF Hobbies 12 blade inrunner
http://edfhobbies.com/index.php?route=product/product&product_id=455Leave a comment:
-
RE: Freewing F-104 Starfighter
Nice very Nice! Our customers never stop amazing us with the endless modifications of our products they make.Leave a comment:
-
-
RE: Freewing F-104 Starfighter
Glad you enjoyed it. I started out on RC Helicopters then went to foam warbirds and then composite and foam jets up to 90mm. Welcome to the world of foam jets.Leave a comment:
-
RE: Freewing F-104 Starfighter
That was fun to watch and the engine and after burner effects are the best I've seen. Are those flaps or airbrakes :rolleyes: , those babies look like they're 90 degrees to the wing!Originally posted by urrlSome alterations on afterburner mod, fan, etc
I just got my feet wet today with my first ducted fan (Freewing 80mm F-86) and it was a blast!!
SteveLeave a comment:
-
RE: Freewing F-104 Starfighter
This morning's flight with 12 blade inrunner
Leave a comment:
-
RE: Freewing F-104 Starfighter
Some alterations on afterburner mod, fan, etc
Leave a comment:
-
RE: Freewing F-104 Starfighter
First of three flights this morning with my favorite jet.
Leave a comment:
-
RE: Freewing F-104 Starfighter
Thanks :D
Here's the flight right after the crash landing
Leave a comment:
-
RE: Freewing F-104 Starfighter
Dang that is a gorgeous jet, and the sound is awesome from the fan you are using. If I can get a bit more experience with my Stinger 64 and a couple of other EDFs that I have, I might just have to have one of those! Glad your crash landing didn't result in any damage. It really looked like it basically floated in and pancaked in the grass. Nice flying!Originally posted by urrlLeave a comment:
-
RE: Freewing F-104 Starfighter
That landing wasn't that bad. At least it lived to fly another mission.
KevinLeave a comment:
-
-
RE: Freewing F-104 Starfighter
Originally posted by Alpha.MotionRCVery impressive performance. What is the weight of that fan?
246g from this web page:
http://edfhobbies.com/index.php?route=product/product&product_id=455Leave a comment:


Leave a comment: