Roban - World Class Scale Helicopters

New E-Flite AT-6

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • Justwingit
    replied
    Hey fellow AT-6 fans,

    The old Top Flite AT-6 has been around for quite awhile, and I recently came across this one at the Arizona Electric Festival in Mesa Arizona last weekend. She's roughly the same size as the new E-flite AT-6, but is a "built-up", using balsa, ply and covering in an ARF format...

    She's been recovered in an imaginary Reno-Racer scheme, "The Pink Lady" and really does move out, although I think the two planes (the new E-flite AT-6 and this one) are very comparable in speed.

    Here she is being flown by owner Craig B!


    This particular model has a pretty neat background history, so be sure to watch to the end of the video and hear Craig explain how he acquired the model and who exactly built it...

    Enjoy the Show!

    Leave a comment:


  • Ole-Timer
    replied
    In the video it appears the AT-6 is stock. I do not recommend just tossing a 4s in!

    The stock motor in the bird is the venerable 15-980kv that was originally used to power all the heavier ParkZone warbirds on 3s with 10” props. Using a 12” prop on 4s loads it up way too much!
    I agree with TomC that these motors will take a beating and the prop will have to be downsized to accommodate the added load. Keep the amp draw at 50-55max for sure. Anything over 55amp and the motor will cook.
    Due to the larger airframe and slightly added weight of the AT-6, I have pulled both stock esc and motor out. I installed a 60amp Turnigy Plush esc with a FlightLine 3648-880kv motor and will run those on a 4s 4500mAh battery. I can now also use a 12” prop to help get around the big cowl. The airframe is plenty big enough to handle it all and any added weight will be welcome on windy days. Don’t know if any of you have weighed the stock spinner on this plane but at 2.5ozs it’s another bandaid to add nose weight flying a small 3s system on what should be a 4s bird.
    Ill use the stock motor n esc to power a smaller model.

    Amp tests with a 12x8 prop

    20amp 1/2 throttle
    36amp 3/4 throttle
    55amp wot

    The weather here is warming up so perhaps I can fly it before long.

    Leave a comment:


  • rifleman_btx
    replied
    Here's one right here

    Leave a comment:


  • TomC
    replied
    I will be buying the At-6 real soon..I plan to do what I always do with my E-flite planes, Replace the ESC with a Mantis 65 amp and continue to use my Motion RC 4s 4000 lipos.:Cool:

    Leave a comment:


  • TomC
    replied
    You are correct the factory E-flite ESC usually cuts out on me with WOT on my 4s 400 lipos, this is why I toss them as soon as I take the plane out of the box.. I have several E-flite planes, T-28, P51, P47 and ALL have been ungraded with the Mantis 65 amp ESC with 4 s 4000 lipos, all have the stock motors in them,I have probably 200+ throttle happy flites on them with NO motor issues. I do oil the motor bearing every three months, I like to fly fast...

    here are my numbers with no motor problems with 200+ flites and still running strong...

    T-28
    51.98 Amps
    847.2 Watts

    P-51
    53.58 Amps
    825.1 Watts

    P-47
    53.71 Amps
    836.8 Watts

    These readings the t28 and p47 are running 11x7 APC 2 blade props and are rocket ships..lol.





    Leave a comment:


  • Ole-Timer
    replied
    Originally posted by rifleman_btx
    And I've seen 4s work in this plane...
    Has anyone actually flown the stock motor on a 4s with a bigger esc...?

    I ran some amp tests.
    On 3s it comes in at 41amp wot.
    On 4s it eats a whopping 65amp wot.
    The little 15 980kv motor takes a beating and anything past 45amp on 4s makes it really heat up rapidly.
    At 55amp n up it’s cooking itself.

    I’m skeptical that the stock motor and esc were used in the video.
    If it is stock it’s likley burned up by now...

    Leave a comment:


  • Grossman56
    replied
    Originally posted by Ryan@Motion/ryramZ
    Here's a few of mine.
    Looks good Ryan, have to get some shots of the old and the new together.

    Grossman56

    Leave a comment:


  • Ole-Timer
    replied
    I’ll have to try both those tips...

    Thanks!

    Leave a comment:


  • rifleman_btx
    replied
    And I've seen 4s work in this plane...

    Leave a comment:


  • MikeT
    replied
    I'm finding moving a 2200 3S further back improves handling.

    Mike

    Leave a comment:


  • Ole-Timer
    replied
    Flew mine several times weekend before last. Ran a 3s 3300 pushed all the way fwd. It needed a touch of down on the elevator. Otherwise it flew great. Only mod so far is I trimmed up the plastic gear leg and added larger Robart tires.

    Leave a comment:


  • RCjetdude
    replied
    That looks awesome Ryan. Love the details.

    Leave a comment:


  • ryramZ
    replied
    Here's a few of mine.

    Leave a comment:


  • Bajora
    replied
    Saw (and shot) my first local AT-6 today ... thanks Goosekiller!











    Leave a comment:


  • TomC
    replied
    Very much worth it,,:Cool: with the high winds here in Texas..I have 3 other e flite planes with 60amp ESC and 4s 4000 lipos and they are a blast to fly in the winddy conditions, and even more fun on calm days..They drawl about 50 amps at full throttle at anywhere between 850-1000 watts, my timer is set for 6 mins and I will have 25 to 30% llipos charge after a flite of mostly full throttle...Mantis 65 amp ESC have been most efficient for me..Just my .02

    Leave a comment:


  • fhhuber
    replied
    Worth experimenting to find out...

    It partly depends on your favorite flying style and prevailing wind conditions.
    around here wind can be a big factor. Its almost: "If you can't fly in wind you can't fly in Texas."

    First flight of my first Dynam P-51 the wind owned it (OEM RTF package 2000 mah 3S) I just slid a second 2000 mah 3S in there, not even hooked up and it helped tons. I eventually ended up flying it mostly on 4S 3000 mah because the weight really helped (and the extra power is nice too)

    Leave a comment:


  • MikeT
    replied
    Originally posted by TomC
    looks like by watching the flite video above, I will be able to do my normal E-flite 1.2 mods 60amp ESC with a 4s4000 lipo..
    Is the extra weight worth it?

    Mike

    Leave a comment:


  • TomC
    replied
    looks like by watching the flite video above, I will be able to do my normal E-flite 1.2 mods 60amp ESC with a 4s4000 lipo..

    Leave a comment:


  • At6 Flyer
    replied
    My favorite warbird! I have one on the way from Motion RC. On my first trip to Oshkosh Air Venture many years ago I was astounded to see a gigantic flight of Texans and I have been hooked ever since. I have flown the Top Flite AT6, Midwest AT6, and Ziroli AT6. I'm looking forward to many flights on this plane when the spring thaw come to Minnesota!
    Larry
    Last edited by At6 Flyer; Apr 13, 2018, 08:26 AM. Reason: Spelling error

    Leave a comment:


  • MikeT
    replied
    Picked one up over the weekend. Really fun to fly. Were kicking the idea around about pylon racing them in the stock configuration.

    Mike

    Leave a comment:

Working...