PIC OF THE DAY..
Collapse
X
-
Avanti ready for maidan.... freewing 6s inrunner.... 125 amp esc..... a3 gyro with invisable wing fences installed...t45 pilots..all mods done also fr gear ect 3 coats of poly and some 1/16 inch pinstripe done:Cool::pop NOW waiting on the weather RAIN...RAIN...RAIN...:Angry::Not-Talking:
3 PhotosLeave a comment:
-
-
Got some awesome photos of some of my airplanes at the Austin RC Scale & Warbird event 3 weeks ago courtesy of Jeremy Royall. He is an amazing photographer!8 PhotosLeave a comment:
-
Leave a comment:
-
-
The "Twins" were out today.
(and yes, a blade is missing on the B26. Thankfully had a spare!)1 PhotoLeave a comment:
-
Wing fences made from clear plexiglass almost invisablecool2 PhotosLeave a comment:
-
I'll look into those, FH, possibly even for the Sensei as well. I figured with the Top Flite only costing about $4 at the LHS, it wasn't going to be the highest quality out there, but it's still head and shoulders above the stock nylon prop. That one, putting it on an ink pen (not even an actual balancing rig with low friction bearings), one blade always falls. When I ran the motor with the nylon prop, I could see obvious vibration in the plane. I even tried some light sanding on the heavy side, and couldn't take enough off to come close to balancing it. I was worried if I did end up taking enough, it might weaken what was left.
Edit: Desert Aircraft, that carries the Xoar props, is right here in Tucson! How have I missed that?Leave a comment:
-
XOAR makes some nice scale outline wood props. They don't do the detailing work. These are more efficient props than the Top Flite or Master Airscrew wood props.I decided the Waco needed a wooden prop (and preferably, one that was a bit better balanced than the stock nylon). I picked up a Top Flite 12x6 from the local hobby shop today, gave it some tip paint, and mounted it on the plane. Considerably less shaking with motor running, and looks much nicer, too. Held the plane back and did a full throttle check, and dang, that motor has some pull!
The added efficiency sometimes shows in more useful thrust or higher rpm and sometimes as increased flight time (lower wattmeter reading, but the same useful thrust)
They do cost a bit more, but I think they are worth it.
Check if your favorite supplier can get them.
Note that the example pic here shows one that someone detailed more than what comes when you order these.Leave a comment:
-
Now, as soon as I get my decals from Callie, I can finish it up and take it for its maiden flight.Leave a comment:
-
I decided the Waco needed a wooden prop (and preferably, one that was a bit better balanced than the stock nylon). I picked up a Top Flite 12x6 from the local hobby shop today, gave it some tip paint, and mounted it on the plane. Considerably less shaking with motor running, and looks much nicer, too. Held the plane back and did a full throttle check, and dang, that motor has some pull!2 PhotosLeave a comment:
-
Edge 540 is FMS too! I have both as well. Already ordered FMS parts for both planes. I got the Edge from Horizon for $146! Got the corsair from Hobbyzone.com on clearance for $259! Fantastic planes.
Although the Red Bull Corsair was sold through Horizon under Staufenbiel as the manufacturer, it was really produced for Staufenbiel by FMS. All the parts were interchangeable from FMS's 1400mm model, which only had a few paint differences and no Red Bull decals. The only thing missing on the Red Bull version was the attachment seats for the drop tanks. A cut-out in the wing is there for it, but FMS doesn't sell that small part alone (comes with the whole wing already installed). So I just ordered the rockets, which as you know fit with no modifications and used a 1" PVC pipe cut to 3" in length, cut a 3/8" channel in it (see photos), and the drop tanks slide right on "just like downtown". As Horizon was phasing out this Red Bull Corsair, I bought a second at a good price (initially for parts which at the time I didn't know it was an FMS plane), so at least I have the fuselage with the decals on it. Staufenbiel also had a Red Bull Edge, which I purchased, and I love the plane (also have a new spare in a box). However, I haven't figured out who built this for them yet. Got it for $150, complete BNF. The AR636, ESC, servos and motor were worth the price. I keep coming close to selling both of these spares to a couple guys in our club who have been after them, but each time I almost give in, I change my mind and realize they're worth more to me in parts than what I could sell them for.Leave a comment:


Leave a comment: