Ive heard on several YouTube videos on the set up saying CG should be between 70 and the 86mm. Most seem to favor the closer to the 70mm. I set my battery slightly forward on the tray but have never actually measured the CG.
Down to painting the last bit on my and will get it reassembled. Want to get it back in the air before the snow flies.
Eflite Pitts
Collapse
X
-
It appeared to be glued down with hot glue. Mine didnt seem to have a whole lot on the parts. Probably use a foam safe glue to put it all back together. Ive been using the white gorilla glue with good success. -
Gave up on trying for 86mm CG. Puts the battery too far back on the tray. Been flying mine with 3s2200 in center of tray and it seems just right. Checked on RCG forum and it seems that the proper CG is 70mm +/- 3. The information came from a HH representative. Might explain why everyone thinks its nose heavy. Can someone at motion verify this? Might correct the motion pitts info page if true.Leave a comment:
-
These are the tabs that hold the tray in .. They are on the top and bottom of the tray . If the battery is to far forward on the tray and strapped down it wont snap in .1 PhotoLeave a comment:
-
Yes it was a typo on my part it’s a 3s 2200 mah mine snaps but it must not be enough gonna have to figure out a way to make it stay.Leave a comment:
-
No problem with mine , has a good solid snap and stays put . That being said i'm only using whats recommended for battery size ... 1800-2200 mahLeave a comment:
-
I was curious if anyone else is having trouble with the battery tray staying in place. I maidened mine today first flight the tray came loose barely got it on the ground doesn’t fly good with a 3200mah slid all the way back but I managed. I found the tray slid back so I thought maybe I didn’t get snapped in good second flight it happened again barely got it back this time flipped on it’s back nothing hurt just a little mud one tough bird. But I was wondering what are you all doing to keep the tray in place?Leave a comment:
-
Feeling bold or overconfident can be dangerous. My career flying full scale commercially was constantly infused with reminders about the dangers of complacency.
My top wing looks like yours in that it separated a bit from where it attaches to the top of the fuselage. Also my bottom wing seems to have lost the "single body clip" that secures it to the fuselage bottom. I was thinking of adding CA glue to secure both top & bottom wing. I am curious if you will use CA glue too or something else to secure your top wing.
Love the "new and improved" paint job !4 PhotosLeave a comment:
-
-
It will end up with the Cloud Dancer scheme from the 1980s movie1 PhotoLeave a comment:
-
So true , gravity becomes the winner to most all of us at some point !
Now that's looking like a real Captain America aircraft..... Awesome ! !Leave a comment:
-
It happens to the best of us. I put several more flights on mine last week, no issues. Started to get a little overconfident and made a low inverted pass. Dont know what happened, must have twitched... but I got it rolled out and almost level when it hit the ground. I have to say its durable. Knocked the gear off, the top wing cabane and the I struts. Only parts that were glued on. Didn't hurt the foam any. I was amazed. So ive taken this opportunity to repaint it before i reassemble it.2 PhotosLeave a comment:
-
well I maidened it today. What a fantastic flyer, so stable. I bought the PNP version with an AR410 receiver (none of that as3x stuff). Takeoff roll was straight, rotation and climb out was so easy and smooth. CG balanced exactly where the manual said it should with a 3C 2200Mah. I think it convinced one of the other flyers to buy one(thats what he said anyway). My only problem was my approach and landing and totally my fault (stupid). I was standing about mid-field while flying it and tried landing "on the numbers) which is 300 feet away. The landing was ok but I had trouble keeping the rollout straight and she bumped into the chainlink fence spinner first. As of now, the rudder channel doesn't move at all and its servo just buzzes. The top wing came loose a bit and the tail wheel wire came a little loose. So am going to order a new rudder servo and use Beacon foam finish and CA glue to set the top wing securely in place. Some glue for the tail wheel wire and hopefully that's all she needs. How sad. After such a beautiful flight to end it like that. From now on, all my landings will be planned closer to where I am standing.Leave a comment:
-
-
With a 4s it's much more sporty in comparison to the 3s... And it pretty good on 3s !Horizon quality control usually very good. Quality products for the most part(nobody is perfect....the ex wife thought she was) Love the a3x rx. I have stabilized lemon rx, admiral stabilized rx, hobby eagle a3l, eagle tree 2d/3d wich all work well but the "tuning" of the HH a3x to each specific model makes a better flying airplane. The umx is a great flyer as is the 980mm(have both). Both handle winds well, both have the glide ratio of a set of keys and both need to be "flown" all the way to the ground. No chop throttle and flare. Both are a hoot to fly. Both very similer to me as to flying charicteristics. Pretty sure the 980mm will take the crown as soon as my 1800 4s get here. Only flown her on 3s so far.Leave a comment:
-
Horizon quality control usually very good. Quality products for the most part(nobody is perfect....the ex wife thought she was) Love the a3x rx. I have stabilized lemon rx, admiral stabilized rx, hobby eagle a3l, eagle tree 2d/3d wich all work well but the "tuning" of the HH a3x to each specific model makes a better flying airplane. The umx is a great flyer as is the 980mm(have both). Both handle winds well, both have the glide ratio of a set of keys and both need to be "flown" all the way to the ground. No chop throttle and flare. Both are a hoot to fly. Both very similer to me as to flying charicteristics. Pretty sure the 980mm will take the crown as soon as my 1800 4s get here. Only flown her on 3s so far.Leave a comment:
-
Curious why some of you flyers purchased the Eflite brand Pitts as opposed to Pitts of other brands. All of my purchases have been Horizon hobby.Leave a comment:
-
Its really a fun flyer !! 20 plus flights already , A bit nose CG is good to startNot yet. Just double and triple checking everything. Regional fly-in this weekend so if its not tomorrow then it'll be early next week. Balancing the Pitts on my fingertips at 86mm, it seems just a tad bit nose heavy. Thats with the 3C 2200Mah battery centered on the tray. Will tweak it a bit. How is your Pitts flying going?Leave a comment:
-
Not yet. Just double and triple checking everything. Regional fly-in this weekend so if its not tomorrow then it'll be early next week. Balancing the Pitts on my fingertips at 86mm, it seems just a tad bit nose heavy. Thats with the 3C 2200Mah battery centered on the tray. Will tweak it a bit. How is your Pitts flying going?Leave a comment:


Leave a comment: