Eflite Pitts
Collapse
X
-
It'll be fine . I set my planes up with triple rates .. High being set as far as the control surface will go just before binding up then set mid and low rate each 25% less than the high rate % shown in my radio .Leave a comment:
-
I am new to setting up and using dual rates. I usually adjusted my control surface movement via "travel" and some Expo. This Pitts 850mm calls for aileron 12mm low & 21mm hi rates. I didnt quite get that as you can see in these pics. You think I'll be ok for a maiden flight like this or is it important to set at the 12 and 21mm?
2 PhotosLeave a comment:
-
-
Thank you, finally got em all in. Whew! and I didnt break anything doing it.Leave a comment:
-
In this close-up again taken from the left wingtip, 1 tip of the strut extends further out than the other tips. I mounted the struts with this extension attached to the lower wing and facing aft.
1 PhotoLeave a comment:
-
Heres a pic taken from the left wingtip. I managed to get the top pin in all the way so I guess it is just a matter of wiggling it a bit til it all lines up?
1 PhotoLeave a comment:
-
Appreciate the help with sticking the retainer pins into the struts. Can someone post a close-up pic of a strut with the retainer pin inserted. Maybe I dont have my struts oriented correctly. I managed to get the pins inserted through the first hole but the second hole is my problem. Thank you.Leave a comment:
-
Wow ! Love this plane , ran 2 packs this morning . as you can see in the pic it's a bit windy but I've been waiting a few day for the first flights . Ran high rates all around . Definitely not a beginner plane. LOL !
Ran with 4s 1800 and a 4s 2200 timer at 5 minutes.3 PhotosLeave a comment:
-
Yes , getting the pins in takes some effort ! I placed the wings on a nice soft towel so i could push pretty hard on the strut .. rock the strut a little forward to get the pin started . after getting them together the first time it's easier after that .It arrived today. I chose the free shipping option and it took about 12 days. The foam is very denseand has a strong feel. The instructions seem like they were translated from chinese to japanese then into english. HH made in America should be able to do better than that. I'm gaving a heck of a time inserting the 4 "retainer pins" to lock the struts in place. Cant seem to stick it through all the holes. Anyone have a tip for that?Leave a comment:
-
It arrived today. I chose the free shipping option and it took about 12 days. The foam is very denseand has a strong feel. The instructions seem like they were translated from chinese to japanese then into english. HH made in America should be able to do better than that. I'm gaving a heck of a time inserting the 4 "retainer pins" to lock the struts in place. Cant seem to stick it through all the holes. Anyone have a tip for that?Leave a comment:
-
I'm excited ! As captAmerica says the foam and paint are excellent. Everything went together great .2 PhotosLeave a comment:
-
I flew it again today in some stiff wind. It didnt seem to care. I put a longer arm on the rudder servo and it seem to give me more throw and more effectiveness. Landing was a handfull in the crosswind. Made 3 attempts before I stuck it. Hoping tomorrow will be less windy and I can try again.1 PhotoLeave a comment:
-
Mines listed as out for delivery tomorrow !! But of course the forecast for thursday is 30's and maybe some snow :-(Leave a comment:
-
This new pitts has some of the densest foam ive seen out of an Eflite. The canbanes have plastic reinforcements top and bottom on the attach points. I didnt use the flying wires yet, and rung it out every which way I could. Wings are held on with clips so the can easily be removed. Everything snaps together real tight. I think it will take about any punishment you could throw at it. I intend to find out.Leave a comment:
-
-
On my UMX Pitts one wingstrut came loose from the G-loads and I added my own reinforcement with cardboard which I cutout in exact shape as the stock struts. I wonder how this new Pitts will handle the Gs.Leave a comment:
-
Curious about why Horizon chose this 30 something wingspan and not something like 44" like so many of their birds are?Leave a comment:
-
I bought the FMS Pitts four years ago. Still have it, no gyro, 55 inch wingspan, 8lbs 5 ozs, flies on 6s. Landings are definitely exciting! No rudder issues and reasonably snappy. I ditched the stock three blade prop and installed a two blade wood zoar prop for improved performance and no vibration.Leave a comment:


Leave a comment: