Eflite Pitts
Collapse
X
-
On my 2nd Pitts, this one got a different paint scheme. Love flying it. Currently building a 1/3rd scale.1 Photo -
I got some great flights with mine the other day. I haven't flown it since last summer.Bone & Boner's first adventure. Pitts Biplane and Axial Wraith: Dennis Wright Cameras: Sue & Dennis Wright music - bensound.comLeave a comment:
-
I punch it off the ground in a hurry , 4s is the way to go30 plus flights?! Wow ... I had only 2 flights in a few weeks. My first 2 went well until the ground loop on landing rollout. Minor dings that my foam tac took care of.
Attempted a 3rd today in calm winds but during early part of the squirrely takeoff roll she ground looped a little but just enough to bend the left main gear strut outward a bit. Hopefully my trusty pliers will straiten it out.
Whats the technique to avoid ground looping this squirelly bird? Even my Parkzone Corsair is not ground looping on me and Corsairs are known to be squirelly.
As far as landing ... really it likes to be under power ALL the way in , including while on the ground (keep wind on the rudder)Leave a comment:
-
The 2 main gear on your 1/4 scale looks a bit wider than your dads Pitts or on my Eflite Pitts (or my eyes are playing with me).Leave a comment:
-
30 plus flights?! Wow ... I had only 2 flights in a few weeks. My first 2 went well until the ground loop on landing rollout. Minor dings that my foam tac took care of.
Attempted a 3rd today in calm winds but during early part of the squirrely takeoff roll she ground looped a little but just enough to bend the left main gear strut outward a bit. Hopefully my trusty pliers will straiten it out.
Whats the technique to avoid ground looping this squirelly bird? Even my Parkzone Corsair is not ground looping on me and Corsairs are known to be squirelly.Leave a comment:
-
Slighty related, this is my winter project. Im restoring an old 1/4 scale pitts and finishing it to match my Dad's S1S.2 PhotosLeave a comment:
-
If I do get to fly it, I'm going to try the aft CG. I was running the batt all the way forward. I didnt have any issues with landing, just kept power on and drove it on. Its a squirrelly sucker for sure.Leave a comment:
-
Had hopes to fly mine today, supposed to be sunny and 36. Nah, cloudy , windy and 28, foiled again. Rain the next 2. Hope to get a few more in before winter officially sets in
..Leave a comment:
-
Looks pretty close to the 4s sweet spot I like for sure ! . The landing gear on this pitt is super rigid ... I'm sure that's what contributes to the landing bounce as well. I'm at 30 plus flights and I'm getting pretty smooth Landings now .Leave a comment:
-
I flew mine twice this past Sunday and used the 70mm CG measurement and it was rock solid with an Admiral 22oo 4s. With the 70mm as the CG, your CG points line up with the 2 plastic nubs that attach the top wing to the cabane struts. There are slits in the battery tray and CG for me was the front of the battery lined up to just past the first slit (see attached picture). I had a lot of fun in the sky with this and 4s has crazy power. I found it best landing on the grass next to my paved runway though. I got bouncies on the pavement as you have to be perfect coming in. You have to land it like a delta where you want your nose up because she can be a handful on the ground.Ive heard on several YouTube videos on the set up saying CG should be between 70 and the 86mm. Most seem to favor the closer to the 70mm. I set my battery slightly forward on the tray but have never actually measured the CG.
Down to painting the last bit on my and will get it reassembled. Want to get it back in the air before the snow flies.Leave a comment:
-
I'm painting all the white parts yellow and adding design to the wheel pants. Great looking little Pitts except, as usual, the pilot size is way off. You don't sit in a Pitts, you wear it. Can't fly it 'till the weather improves. DocLeave a comment:
-
Beautiful! Now back to low-level inverted flight ...
I also added trim to the wheel pants & top of the engine cowling. Needed more than the stock trim.
Now to try flight with 40% aileron expo bc 30% was still a bit twitchy for my takeoffs & landings.
1 PhotoLeave a comment:
-
-
Got my Pitts all reassembled. Of course now they are calling for snow the next 2 days. Figures4 PhotosLeave a comment:
-
The HH rep who flew the Pitts at our airshow, did mention that all HH airplanes are designed in illinois and built in china.Leave a comment:
-
-
Nice looking FMS plane, most, if not all new Eflite planes are being made by FMSLeave a comment:
-
Here in las vegas was a district airshow and a HH rep was here from Illinois. He flew this new Pitts with a 4-cell and high rates. Put so much stress on the airplane that the canopy popped off during spins. Was good to see how an Hh guy flies it and looked just like in the product video. An amazing product just like the UMX version. Now where's my servo and epoxy/ CA glue so I can.effect my repairs?Leave a comment:
-
I'm more of a "seat of the pants" CG guy with a plane this size also . Run high rates so you can catch it if needed .... send it up and fine tune it from there . I really like a 4s 1800mah about 1 cm back from the front of the tray for sporty flying this Pitt .Ive heard on several YouTube videos on the set up saying CG should be between 70 and the 86mm. Most seem to favor the closer to the 70mm. I set my battery slightly forward on the tray but have never actually measured the CG.
Down to painting the last bit on my and will get it reassembled. Want to get it back in the air before the snow flies.Leave a comment:


Leave a comment: