This thread is for those interested in finding out more details and expressing interest in the Dornier Do-335 by Black Horse. Alpha has shared valuable insights into his experiences with the Black Horse products currently being carried by our friends at Motion RC. Maybe he will chime in with his experiences with this unusual and much sought after model.
One question came to mind about this model's motor configuration. What is the best choice for motor rotation direction of the aft motor and how does it impact torque, roll, and yaw during flight?
Another obvious feature of this model is the lower vertical stablizer and rudder. Landing orientation will need to be flatter than most aircraft.
Here are a few more details about the model itself:
SPECIFICATION:
– Wingspan: 1,724mm (67.87in).
– Length: 1,731mm (68.15 in).
– Weight: 6 kg (13.2lbs).
– Wing area: 61.4dm2.
– Wing loading: 97.72g/dm2.
– Wing type: Naca Airfoil.
– Servo mount: 42mm x 21mm.
– Gear type: Electric retract gear, size: (92.2 x 51 x 30.6)mm (not included).
Oleo struts (included).
– Spinner: 80mm.
Parts listing required (not included):
– Radio: 06 channels.
– Servo: 07 servos.
– Motor : Brushless outrunner 1000-1800W, 800KV . (2pcs).
– Propeller: Suit with your engine.
Recommended Motor and Battery set up (not included):
– Motor : Suitable Admiral Brushless Motor . (2pcs).
– Lipo cell: 6 cells 5,000mAh.
– ESC: 60A. (2pcs)
NOT INCLUDING ELECTRIC GEAR RETRACTS
ONLY INCLUDING OLEO STRUTS.
ALL BALSA – PLY WOOD CONSTRUCTION.
COVERED IN A HEAT-SHRINK FILM WITH PRINTED.
One question came to mind about this model's motor configuration. What is the best choice for motor rotation direction of the aft motor and how does it impact torque, roll, and yaw during flight?
Another obvious feature of this model is the lower vertical stablizer and rudder. Landing orientation will need to be flatter than most aircraft.
Here are a few more details about the model itself:
SPECIFICATION:
– Wingspan: 1,724mm (67.87in).
– Length: 1,731mm (68.15 in).
– Weight: 6 kg (13.2lbs).
– Wing area: 61.4dm2.
– Wing loading: 97.72g/dm2.
– Wing type: Naca Airfoil.
– Servo mount: 42mm x 21mm.
– Gear type: Electric retract gear, size: (92.2 x 51 x 30.6)mm (not included).
Oleo struts (included).
– Spinner: 80mm.
Parts listing required (not included):
– Radio: 06 channels.
– Servo: 07 servos.
– Motor : Brushless outrunner 1000-1800W, 800KV . (2pcs).
– Propeller: Suit with your engine.
Recommended Motor and Battery set up (not included):
– Motor : Suitable Admiral Brushless Motor . (2pcs).
– Lipo cell: 6 cells 5,000mAh.
– ESC: 60A. (2pcs)
NOT INCLUDING ELECTRIC GEAR RETRACTS
ONLY INCLUDING OLEO STRUTS.
ALL BALSA – PLY WOOD CONSTRUCTION.
COVERED IN A HEAT-SHRINK FILM WITH PRINTED.
Comment