Official Nexa 2020mm F8F Bearcat (Balsa ARF) Discussion Thread
Collapse
X
-
I am looking for the stock tailwheel assembly for this airplane. If you have one available, please let me know! Thank you! -
Thanks for the info. I'm seriously considering it since it's on sale.Leave a comment:
-
-
I'm considering buying this great looking model, but need some information first. Can someone that owns one please tell me the height dimension (including the tail of the fuse) of the vertical stabilizer? Please.Leave a comment:
-
What is the balance point you guys are using? Right now I have mine set up at the forward range of the c/g per the instructions. I was able to balance the beast without adding any nose weight. All up weight is 21lbsLeave a comment:
-
I am just finishing up my VQ Bearcat with electric power. I am running an Avian 8075-230kv motor, YEAp 120A esc and 12s batteries. Just getting ready to check the c/g on the bird. All up weight so far is 20lbs 10 oz. I rebuilt the firewall and moved it forward 2.5” to the batteries can be as forward as possible.Leave a comment:
-
Hey Guys,
New to HobbySquawk.
I was planning on getting this NEXA F8F Bearcat. I just had one question,
I have a DLE40 Twin, will it fit in the cowl without having to cut out clearances for the spark plug ? The Overall width of the DLE40 with the spark plug caps in around 20.5cm ?
What is the smallest diameter on the cowl ?
Thank you all for your advice and support.
Cheers.
PritLeave a comment:
-
Hey everyone - I am curious who has bought this plane recently and whether anyone is running electric. If you’re doing electric, what power system and batteries are you using and what did the weight work out to?Leave a comment:
-
I painted right over the blue finish with automotive acrylic enamel and clook ear coat. Beautiful.Leave a comment:
-
Any of you fantastic people have any lead on a canopy for the 2020mm Bearcat? I only need the transparent canopy, not the cockpit assembly. Mine was shipped without one and the shipment is not expected until December. Thanks!Leave a comment:
-
-
Reassembled the cat in time for SEFF. I still need to add markings but I will say it looks the part and she flies great.2 PhotosLeave a comment:
-
I have to check in with my contact as he started posting updates on RCG. They have an updated beautiful Zero and a BF109 .
Some of the discussions are confidential however I can reveal that they have contacted two USA major distributors. The delay was in the test shipping and damage to the models in shipping.
I think the continued delay is the absolute insane cost of the containers that have gone from $4000 upwards of $10,000. I think we can all see the cost factored into the Motion RC models, really not their fault but shipping from overseas is absurd at this time.
I will ask Mr Lee this evening for an updateLeave a comment:
-
Hey Lou - now that we are a couple months down the road.......can you offer any hope to the rebirth of the CMP product stuff? While they certainly weren’t perfect (what is?), they weren’t impossible to fix, without spending a ton. Getting a decades worth of progress and experience hopefully might help them along in some improved ways. Still flying their Hellcat, with a Spitfire awaiting an eventual build.
1 PhotoLeave a comment:
-
-
First time using solartex. I really like this material.1 PhotoLeave a comment:
-
Almost done with mine not really happy with the quality but she will fly.Leave a comment:
-
Finally got around to cutting the rudder free so i can recover it and the vertical fin. Once i peeled the covering off i removed the remaining adhesive with mineral spirits and the isopropyl alcohol. I will fill any void with spacklel compound and then use iron on fabric and paint to match.1 PhotoLeave a comment:


Leave a comment: