Swift 3D 1200mm (47.2") Wingspan - ARF BUNDLE from Skynetic - SKY1009-002
Click here for the official product page
Click here for the official product page
The Skynetic Swift EPP is a 3D flyer that can penetrate through moderate winds while performing show-stopping 3D maneuvers with ease. Both wing and gear are easily removable for transport and/or flying preference. Made of light yet durable and thick EPP foam with a streamlined and aerodynamic profile, the Swift is tailor-made for countless hours of exhilarating, flying fun!
FEATURES:
- Slick, streamlined and aerodynamic profile with sharp red, blue and yellow livery
- Easy-to-remove landing gear for transport and flying preference
- Powerful AS2814 KV1000 Brushless motor for a wide flight performance envelope
- Skynetic Swift 3D 1200mm (47.2") Wingspan - ARF BUNDLE
- AS2814 KV1000 Brushless motor
- 40-amp brushless ESC with XT60 connector
- 4x 17g servos
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 3 Cell 11.1V 1300 mAh Li-Po battery with XT60 connector - We recommend EPR13003X6
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
- 2 X 12" Servo extension leads - ADMSERVX300
- 1 X 4" Servo "Y" lead - ADMSERVYX150
AGE LEVEL : 14 AND UP
SKILL LEVEL : INTERMEDIATE
BUILD TIME : 5 HOURS
Wingspan | 44.1in / 1120mm |
Length | 46.5in / 1180mm |
Flying Weight | 810 - 900g |
CG (Center of Gravity) | 120 - 130mm from the leading edge of the wing at the root |
Power System | Powerful AS2814 KV1000 Brushless motor (installed) |
Electronic Speed Control | 40-amp brushless ESC with XT60 connector (installed) |
Propeller / EDF | Electric propeller |
Servos | 4x 17g |
Landing Gear | Fixed |
Required Battery | 3 Cell 11.1V 1300 mAh Li-Po battery with XT60 connector (required) |
Required Radio | 4+ channel radio system (required) |
Ailerons | Yes |
Elevator | Yes |
Rudder | Yes |
Flaps | No |
Lights | No |
Hinge Type | Foam |
Material | EPP Foam |
Skill Level | Intermediate |
Build Time | 5 Hours |
Recommended Environment | Outdoor |
Comment