Flightline RC Tigercat F7F

[rifleman_btx]

Nothing I know of, what most guys do is use foam tac. Others CA. But lock tight is just a plastic killer

[MichaelJ]

Maybe liquid metal

[MichaelJ]

Is there something that I can coat the inside of the spinner to protect the plastic from locktight?

[Elbee]

wish that some manufacturers would offer these planes without paint it would make things so much easier

Acknowledged and Agreed. :)Best, LB

[MichaelJ]

wish that some manufacturers would offer these planes without paint it would make things so much easier

[Elbee]

Michaelj, Great to see something new. Well done. Best, LB

[rifleman_btx]

Definitely unique and different

[MichaelJ]

Based on cal-Nat- Airways

[rifleman_btx]

I like that

[MichaelJ]

Plastic+ locktight = broken spinner butt anyw8 (pardon the mess)

[rifleman_btx]

Right on, good deal!

[Scamp73]

Thanks, I could Alpha’s post on RCGroups for calibrating. All is good

[rifleman_btx]

Mine were on point from factory, but that doesn't mean every one will be. I still do the calibration flipflop before any maiden of any new plane I build.

[Scamp73]

Has anybody had to calibrate the ESC's to get them sync'd?

[rifleman_btx]

Indeed, just remember I am running mine with a parallel adaptor for safety reasons as well. You can't go wrong with either battery selection

[Grossman56]

The 3600's work great as well, that's what I usually go with.

Grossman56

[rifleman_btx]

I got the nanotech 4000mah 25c and after 7mins they were still at 3.90volts per cell. And still cold like they were never run at all. For 36 a pop, a good deal

[Mad Baron]

When I do get the cash saved up I will have to get some more 4000s as well. Looking forward to getting this plane!

[Grossman56]

Good move MB, you won't regret it, she's a gentle airplane, I love mine!!

Grossman56

[rifleman_btx]

It's a very awesome plane!