1/10th Team Associated On-Road Tires

Collapse
X
Collapse
First Prev Next Last
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Elbee
    Be humble...be approachable...and be credible.

    • Feb 2018
    • 4819
    • Wichita, Kansas
    • Send PM
    #1

    1/10th Team Associated On-Road Tires

    Hey Guys, I have an 1/10th scale on-road race car that I used to race back in the day. She still runs great, but I need new spongie tires/donuts or whatever is being used for on-road now-a-days. I want to run the same aluminum wheels at least on the front. Is there a source for these? Any suggestions? Best, LB
    "I am having an extraordinary ordinary life."
    ~Lucky B*st*rd~

    "Find satisfaction in the process rather than an outcome."
    ~Anonymous~

    AMA#116446
    Tags: None
    • hilldebrandt
      Certified Crash Specialist

      • Feb 2019
      • 61
      • Reading, PA
      • Send PM
      #2
      Elbee,
      I'm going to assume that the car has the old pin and bearing wheel hubs. You can check out John's bsr tires to get an idea of what will fit. They will have those old wheels with new foam tires mounted. Just Google it. Also A-main hobbies sells the BSR tires as well..
      Gregg

        Comment

        • Elbee
          Be humble...be approachable...and be credible.

          • Feb 2018
          • 4819
          • Wichita, Kansas
          • Send PM
          #3
          Originally posted by hilldebrandt
          Elbee,
          I'm going to assume that the car has the old pin and bearing wheel hubs. You can check out John's bsr tires to get an idea of what will fit. They will have those old wheels with new foam tires mounted. Just Google it. Also A-main hobbies sells the BSR tires as well..
          Gregg
          Thanks Gregg, Yep, pin with bearings on the front and four cap screws for the rear. The wheels are machined aluminum, I would like to continue using those, so just looking for donuts. We used to mount and true up all our own stuff, but that might not be possible anymore. I will check out those sources. Thanks again. Best, Steve.
          "I am having an extraordinary ordinary life."
          ~Lucky B*st*rd~

          "Find satisfaction in the process rather than an outcome."
          ~Anonymous~

          AMA#116446

            Comment

            • hilldebrandt
              Certified Crash Specialist

              • Feb 2019
              • 61
              • Reading, PA
              • Send PM
              #4
              Originally posted by Elbee

              Thanks Gregg, Yep, pin with bearings on the front and four cap screws for the rear. The wheels are machined aluminum, I would like to continue using those, so just looking for donuts. We used to mount and true up all our own stuff, but that might not be possible anymore. I will check out those sources. Thanks again. Best, Steve.
              You're welcome. BSR sells just the donuts as well. You should have no trouble getting them and mounting to your old wheels. Those tires are being used for High Bite Dirt Oval racing across the country right now, so they are in good supply.
              Gregg

                Comment

                Previous template Next
                Working...