Kv1 question

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • Sappo
    Member

    • Feb 2020
    • 346
    • Send PM

    #1

    Kv1 question

    Where the heck does the unditching log mount on the kv1?looked at so many images my eyes are bleeding but I can't see where it goes
  • Rubicon99
    Senior Member

    • Dec 2019
    • 3311
    • Send PM

    #2
    Originally posted by Sappo
    Where the heck does the unditching log mount on the kv1?looked at so many images my eyes are bleeding but I can't see where it goes
    Its a WWII Russian tank. There really is no right or wrong place to put a recovery log. Find a spot that looks good to you and is feasible for what a crew might have done. Its what I would do and have done when accessories a Russian tank from that era.

    Comment

    • Sappo
      Member

      • Feb 2020
      • 346
      • Send PM

      #3
      I thought so,so its on the rack at the back

      Comment

      • Cascabel
        Member

        • Jan 2020
        • 99
        • Send PM

        #4
        On another note, Has anybody modified one of these tanks to get the smoke to actually come out of the correct place, instead of the tail light ?? The exhaust pipes are on top of the rear deck !!

        Comment

        • SoCalBobS
          Senior Member

          • May 2020
          • 2717
          • Southern California
          • Send PM

          #5
          If you attach the hoses to the top hull, it'll be more difficult to remove and reattach the top and bottom hulls. If you can find a way to mount the hoses so they meet the exhausts without leaking glycerin smoke throughout the interior, that'd be good.
          The more screws it takes to reassemble a tank, the more likely it is you left something out!

          Comment

          • Sappo
            Member

            • Feb 2020
            • 346
            • Send PM

            #6
            Been looking at that as well, the only way I can see how to do that is mounting the smoke unit on the hull and use rigid pipes from the smoker up to near the upper hull and fixed pipes down from the upper hull to fit over the lower pipes. Look at the way the exhaust stacks on a cab over truck are mounted

            Comment

            • Afrikakorps
              Member

              • Jan 2021
              • 6
              • Send PM

              #7
              Attach the pipes to the upper deck exhausts and make a bracket to mount and hold the smoker from underneath the upper deck. Torro used to do this for their KV-2.

              Comment

              • Sappo
                Member

                • Feb 2020
                • 346
                • Send PM

                #8
                That's another way to do it

                Comment

                Working...