P-38 - The Ultimate EPO Lightning

You must Sign-in or Register to post messages in the Hobby Squawk community
Registration is FREE and only takes a few moments

Register now

Announcement

Collapse
No announcement yet.

T-72 issues need some help

Collapse
X
Collapse
First Prev Next Last
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • T-72 issues need some help

    T-72 issues
    hey fellas , i installed the red motors into my T-72 .
    now when i move the right stick forward for the tank to go foward it wants to turn left are right and i have to move the stick left are right for foward and backwards. it has a 6.0 board and looked online and on youtube for help but its got me stumped.
    thanks
    Bryan

  • #2
    Originally posted by muffinman View Post
    T-72 issues
    hey fellas , i installed the red motors into my T-72 .
    now when i move the right stick forward for the tank to go foward it wants to turn left are right and i have to move the stick left are right for foward and backwards. it has a 6.0 board and looked online and on youtube for help but its got me stumped.
    thanks
    Bryan
    Need to reverse the motor leads (blk to red) on the motors. This is normal with Red 390 motors.

    Comment


    • #3
      Originally posted by Rubicon99 View Post

      Need to reverse the motor leads on the motors. This is normal with Red 390 motors.
      ok would you care to explain how to do this . kinda a newbie to tanks .
      thanks for the quick reply
      bryan

      Comment


      • #4
        Originally posted by Rubicon99 View Post

        Need to reverse the motor leads (blk to red) on the motors. This is normal with Red 390 motors.
        thanks gonna give it a shot.
        Bryan

        Comment


        • #5
          Originally posted by muffinman View Post

          ok would you care to explain how to do this . kinda a newbie to tanks .
          thanks for the quick reply
          bryan
          If you have the motors with “bullet” plug end connectors on the wires, just unplug and move blk to red. If you do not have “bullet” plugs then you will need to splice the blk to red wires at some point between the motors and control box.

          Comment

          Working...
          X