T-72 issues need some help

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • muffinman
    Member

    • Feb 2020
    • 28
    • magnolia texas
    • Send PM

    #1

    T-72 issues need some help

    T-72 issues
    hey fellas , i installed the red motors into my T-72 .
    now when i move the right stick forward for the tank to go foward it wants to turn left are right and i have to move the stick left are right for foward and backwards. it has a 6.0 board and looked online and on youtube for help but its got me stumped.
    thanks
    Bryan
  • Rubicon99
    Senior Member

    • Dec 2019
    • 3311
    • Send PM

    #2
    Originally posted by muffinman
    T-72 issues
    hey fellas , i installed the red motors into my T-72 .
    now when i move the right stick forward for the tank to go foward it wants to turn left are right and i have to move the stick left are right for foward and backwards. it has a 6.0 board and looked online and on youtube for help but its got me stumped.
    thanks
    Bryan
    Need to reverse the motor leads (blk to red) on the motors. This is normal with Red 390 motors.

    Comment

    • muffinman
      Member

      • Feb 2020
      • 28
      • magnolia texas
      • Send PM

      #3
      Originally posted by Rubicon99

      Need to reverse the motor leads on the motors. This is normal with Red 390 motors.
      ok would you care to explain how to do this . kinda a newbie to tanks .
      thanks for the quick reply
      bryan

      Comment

      • muffinman
        Member

        • Feb 2020
        • 28
        • magnolia texas
        • Send PM

        #4
        Originally posted by Rubicon99

        Need to reverse the motor leads (blk to red) on the motors. This is normal with Red 390 motors.
        thanks gonna give it a shot.
        Bryan

        Comment

        • Rubicon99
          Senior Member

          • Dec 2019
          • 3311
          • Send PM

          #5
          Originally posted by muffinman

          ok would you care to explain how to do this . kinda a newbie to tanks .
          thanks for the quick reply
          bryan
          If you have the motors with “bullet” plug end connectors on the wires, just unplug and move blk to red. If you do not have “bullet” plugs then you will need to splice the blk to red wires at some point between the motors and control box.

          Comment

          Working...