Painting for a beginner

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts
  • xargsgrep
    Member

    • Jul 2021
    • 56
    • Send PM

    #1

    Painting for a beginner

    I have absolutely zero painting or airbrush experience but wanted to get an unpainted tank and make an attempt at making it look decent. So far I've just watched some youtube videos on airbrushing for beginners. I picked up a basic airbrush kit here: https://www.motionrc.com/collections...sh-bct5025-006.

    I was looking for some advice on the following:
    1. What else would I need in addition to the airbrush kit?
    2. What primer should I use?
    3. What brand of paint should I get (eg Tamiya, Vallejo, etc)?
    4. A list of colors I should get for a Tiger 1 (primary color gray with a two-tone camo) in addition to some basic weathering.
    5. I'm assuming I should just stick to all water based paint?

    Appreciate any help.
  • 761st
    Member
    • May 2022
    • 392
    • Send PM

    #2
    Welcome. There are many paints and brushes out there. I start a project and if I don't like it, do it over. Some of my work is based on, "what would I do if I were in the field with the supplies I had. Or did not have. I use many sources based on what I need. I have even used spray cans from the local hardware store. As far as customer service on line, these guys are great, Have fun.

    What camo are you looking to do on the Tiger? I too will be following that direction.

    ​​​​​​https://spraygunner.com/?gclid=Cj0KC...4aAmyIEALw_wcB

    Click image for larger version  Name:	Tiger camo.jpg Views:	0 Size:	40.3 KB ID:	352752

    Comment

    • xargsgrep
      Member

      • Jul 2021
      • 56
      • Send PM

      #3
      Thanks, I'll check them out. As for the camo, I will thinking of something like these:

      Click image for larger version  Name:	TigerIE_2-SS-PzGRenDiv.png Views:	0 Size:	182.7 KB ID:	352781

      Click image for larger version  Name:	2nd_SS_PzGrndiers_Kharkov1943.png Views:	0 Size:	172.4 KB ID:	352782

      Click image for larger version

Name:	Tiger-I_Ausf-H_SPzAbt501_jan43.png
Views:	246
Size:	218.9 KB
ID:	352783

      Comment

      • quitcherbitchen
        How I learned to love the bomb

        • Jan 2016
        • 923
        • Altadena, CA
        • Send PM

        #4
        The key with airbrushing is to keep the psi at 30. Leave the air on over the tip as not to clog it and pull back on the dual action before and after the stroke of paint. Hard to explain, but there are a ton of youtube videos that will help. I have lots of experience with enamels, but not so much with acrylics. Most people are the other way around. I would recommend watching Martin Kovac Night Shift for paint ideas and applications. You will have to watch quite a few to piece everything he does together, but I think he has a good eye for detail. look below for other advice that I dove tailed to your questions, You have a good airbrush so just start playing with it.


        Originally posted by xargsgrep
        I have absolutely zero painting or airbrush experience but wanted to get an unpainted tank and make an attempt at making it look decent. So far I've just watched some youtube videos on airbrushing for beginners. I picked up a basic airbrush kit here: https://www.motionrc.com/collections...sh-bct5025-006.

        I was looking for some advice on the following:
        1. What else would I need in addition to the airbrush kit? Plenty of thinner, mineral spirits and Lacquer thinner.
        2. What primer should I use? Mr Surfacer Black Lacquer base
        3. What brand of paint should I get (eg Tamiya, Vallejo, etc)? Doesn't matter Just as long as you use acrylic thinner with acrylic paint and mineral spirits with enamels. I have all different brands and mix like paints I(E enamels)together to get different shades.
        4. A list of colors I should get for a Tiger 1 (primary color gray with a two-tone camo) in addition to some basic weathering. I will let someone else answer that.
        5. I'm assuming I should just stick to all water based paint? No. Sometimes enamels over acrylics or vice versa. Depends on the weathering Just remember that thinning the color is key to getting a good spray. I have used house paint in my airbrush and was able to make it work.

        Appreciate any help.
        Don't just fly--WREAK HAVOC!!!

        Comment

        • 761st
          Member
          • May 2022
          • 392
          • Send PM

          #5
          Originally posted by xargsgrep
          Thanks, I'll check them out. As for the camo, I will thinking of something like these:

          Click image for larger version Name:	TigerIE_2-SS-PzGRenDiv.png Views:	0 Size:	182.7 KB ID:	352781

          Click image for larger version Name:	2nd_SS_PzGrndiers_Kharkov1943.png Views:	0 Size:	172.4 KB ID:	352782

          Click image for larger version  Name:	Tiger-I_Ausf-H_SPzAbt501_jan43.png Views:	30 Size:	218.9 KB ID:	352783
          How comes the painting? Since you posted your possible choices, I decided to "steal" the theme on the first Tiger. Starting looking for like colors. Nothing yet. Any luck with what the RAL might be?

          Comment

          • xargsgrep
            Member

            • Jul 2021
            • 56
            • Send PM

            #6
            Don't think I'll get to the painting anytime soon since I don't have the tank yet. Not sure about the RAL either unfortunately but please let me know if you are able to figure that out.

            Comment

            • 761st
              Member
              • May 2022
              • 392
              • Send PM

              #7
              Found two links. Maybe?

              https://www.cybermodeler.com/color/ral840r_table.shtml
              ​​​​
              https://www.migjimenez.com/img/cms/P...sion-chart.pdf

              Comment

              • xargsgrep
                Member

                • Jul 2021
                • 56
                • Send PM

                #8
                Good find, I think the brown looks close to "Dunelbraun" in the first link.

                Comment

                • 761st
                  Member
                  • May 2022
                  • 392
                  • Send PM

                  #9
                  Thanks. Hahahaha! I was thinking Graugrun RAL 7008. It's gonna be fun. My eyes are becoming "hue weary."

                  Comment

                  • xargsgrep
                    Member

                    • Jul 2021
                    • 56
                    • Send PM

                    #10
                    Now that you mention Graugrun, I'm not so sure about Dunelbraun anymore haha.

                    Comment

                    Working...