I've started on this B206 last Hangar Day, it's like a local one that has the record for most hours logged on a 206.
Here's the link for the kit, I'm using a stock T-Rex 700e mechanics and a Castle Talon 120A ESC.
I have opened up four new Robans and they have all been well packaged and arrived with no damage whatsoever.
Double thick cardboard and double boxes, all parts were well wrapped and taped in place through out.
The paint finish is absolutely gorgeous
I used a 2mm drill to start the holes for the skids and steps.
I used these 3mm hex-heads and aluminum cups from the T-rex.
Nutserts to hold the vertical stab.
I'm using the Brain2 or Ikon2 (same thing just different 😎) and satellite receivers.
Clearanced the frame adapter holes to 5mm for some wiggle room, again I used the 3mm hex-heads and cups from the T-rex.
More to follow...
Here's the link for the kit, I'm using a stock T-Rex 700e mechanics and a Castle Talon 120A ESC.
I have opened up four new Robans and they have all been well packaged and arrived with no damage whatsoever.
Double thick cardboard and double boxes, all parts were well wrapped and taped in place through out.
The paint finish is absolutely gorgeous
I used a 2mm drill to start the holes for the skids and steps.
I used these 3mm hex-heads and aluminum cups from the T-rex.
Nutserts to hold the vertical stab.
I'm using the Brain2 or Ikon2 (same thing just different 😎) and satellite receivers.
Clearanced the frame adapter holes to 5mm for some wiggle room, again I used the 3mm hex-heads and cups from the T-rex.
More to follow...
Comment