2019 Jet Jam Info

[chrisbakerp-47]

I like that -M vertical mod, Chris! How did you do it? Balsa block? Or blue foam?

Please post more photos at the Jam of your Peanut A-10. It looks so well done.

Hey Alpha, thanks. That photo was from last years Jet Jam. Had a blast getting to meet a bunch of RCG and Hobby Squawk members.
The vertical mod was done with a piece of the original EPP foam tip from after I cut it off. Then used a little Spackle for filling and counter. The pod was made with balsa stick sanded to shape and then sealed with Z poxey finishing resin. I used two small carbon fiber rods through the pod and into the vertical stab for added support after gluing it on.

[chrisbakerp-47]

A couple more of the A-4M at our club site last weekend.

[Alpha]

Good deal, Chris. I like your markings overall, too. Just a sharp setup overall!

[chrisbakerp-47]

Thanks Alpha. I love the 80 mm A-10. Flies great. Just wish the battery technology was better so we can have longer flight times. Last year i lost my F-4 on the first flight of the day Thursday. Thought i had a BEC burn out but looks like I had a faulty receiver. Hoping for better results this year after replacing the fuselage, hatch and nose cone this past winter.

[James]

Thanks Alpha. I love the 80 mm A-10. Flies great. Just wish the battery technology was better so we can have longer flight times. Last year i lost my F-4 on the first flight of the day Thursday. Thought i had a BEC burn out but looks like I had a faulty receiver. Hoping for better results this year after replacing the fuselage, hatch and nose cone this past winter.

Make sure you make some 5 picture posts each day from Jet Jam. Could walk home with an Avanti!

[chrisbakerp-47]

Make sure you make some 5 picture posts each day from Jet Jam. Could walk home with an Avanti!

OOOOH! You know it! I'm already planning on each day. I can always use a new jet. :-)

[Dirty Dee]

I'm bringing a bunch of 3D printed ordinance for the Freewing A-10 to Jet Jam if anyone is looking to buy some to spruce up their loadouts. Also have a 600 gallon centerline tank for the phantom available.

Chris' Peanut A-10 might be sporting some GBUs and mk82s on TERs :Cool:

[Lon]

I'm bringing a bunch of 3D printed ordinance for the Freewing A-10 to Jet Jam if anyone is looking to buy some to spruce up their loadouts. Also have a 600 gallon centerline tank for the phantom available.

Chris' Peanut A-10 might be sporting some GBUs and mk82s on TERs :Cool:

Oh my!! Save a set for me. What day are you arriving?? I'll be there Wednesday...(cash in hand):)

[Dirty Dee]

Oh my!! Save a set for me. What day are you arriving?? I'll be there Wednesday...(cash in hand):)

I'll be getting there Thursday morning. Keep an eye out for a guy with a camo green A10 and a 7ft Airbus

[Lon]

It's early here at JetJam 2019. People setting up and unloading. A few flights put in. Great flying field!

[James]

It's early here at JetJam 2019. People setting up and unloading. A few flights put in. Great flying field!

Hey Lon, Looks like the pcture links are broken, when posting from your phone use the camera button on top left of message box. Then use the upload. I posted pics directing you.

[Lon]

Try posting pictures again

[Lon]

[RCPilot66]

Jet Jam bound!

[dkalwishky]

We arrived Monday but just got to the field today. I know it's a day early but man I'm ready to do some flying!

[Alpha]

Looking good, guys and gals! That's quite an Albatros!

[dahawk]

Hope you guys have a blast and are blessed with great weather!

[Race 22 Crew]

Day prior to the official First day and already lots of flying going on. Winds were variable but right down the runway. Robert is running around making sure everything is good to go. I think I have Fernando aka Alpha 10 sold on a L39. It’s going to be a great weekend.

[chrisbakerp-47]

Day one of flying done.

[Lon]

Jet Jam 2019...The variety of EDFs here at Jet Jam is great!!