150 results in 0.0083 seconds.
-
BTW the ABC props are Beryllium copper so dont mistake it for brass because dry grinding on them without PPE is very hazardous . You can also age them...Leave a comment:
-
These will finish as 6 + 4 YY's. Im just waiting for the bearings and hardened sleeves that tie all 3 bearings I use axially together.
Danke,...Leave a comment:
-
Look here https://www.sarikhobbies.com/product/f86-sabre-canopy/ You can ask them if this will fit it says approx 14.5 inch x 3.5 inch so it should be...Leave a comment:
-
Four flights today. Flys as good as the 80 and is just about as user friendly with the easy on wings (I keep the wings on the 80 all the time. I needed...
Leave a comment:
-
Christian Lucas, I haven't seen you post in awhile in Germany, so I still hope you are ok. Life is more important than arguments about RC motors. I'm...
Leave a comment:
-
I’m going to set up tailerons, and—much like on the F-14—I’ll mix the ailerons with the flaps; this is true to the full-scale aircraft and I’m...Leave a comment:
-
Yikes! A detracted landing gear. Those early pilots went through a lot of trials, very few instruments, no radar, no computer simulation before flight....Leave a comment:
-
If we think we have it rough trying to get these to fly, here's an OH SH*T from an actual P12:
Grossman56
(Dangerous Dan)...Leave a comment:
-
Yeah, I just ordered a box of weights as well, they must wonder why all of a sudden they're moving so many!
Had some Amazon points so I got mine...Leave a comment:
-
Thanks for the info on getting the lead weights. I think I'll pick up a box just for this kind of thing that might come up.
Cheers
...Leave a comment:
-
Hi Dan: Good work on trying to get a solution to fly her. Next week is pretty decent weather, highs in the mid-50s and mostly sunny. I know you have to...Leave a comment:
-
Hi Paul. Yes, I'm talking the whole canopy including the foam base. Good question and I'll edit my want ad to specify that point so it's more clear to...Leave a comment:
-
Are you talking the whole canopy including foam base etc or just the clear acrylic. You may have to buy the FMS or Arrows hobby clear acrylic bit and...Leave a comment:
-
Nice one, R.
I'd like to enlist opinions from the community regarding the color palette for an Eastern Bloc camouflage scheme. I have to...Leave a comment:
-
PLEASE HELP !!!! FREEWING 80MM F-86
I tried and tried but cannot find the canopy new or used for my Freewing 80mm F-86 Sabre.
Any help would be GREATLY appreciated......... especially... -
Agreed Dan. Still believe if we go slow and check everything several times, we can get a decent flying plane. I glued 4 oz. of weight behind the cowl,...Leave a comment:
-
You know, there's something just not right about this airplane. In the reviews, some fly perfectly right out of the box, others augured in with squirrely...Leave a comment:
-
Wanted; Freewing 80mm F-86 Canopy
Looking for a new or used canopy for the Freewing 80mm F-86 Sabre. I'll pay only via PayPal. Too many scammers out there now....
-
Grossman56,
That's what my balance looked like before the 2 flights. I'd add a little more to be safe, you can always take it out. It still felt...Leave a comment:
-
Davegee,
Not sure if I'm on the right track with the weight but on the Motion P-12 there are guys saying they are adding weight to balance....Leave a comment:
-
Your right, the amount of extra weight is unbelievable. Even if you used a 3300 4s, it's positioned so close to the CG that I doubt if it would have...
Leave a comment:
-
MotionRC is now the only US souce for Roban. Just send them an email on what you want, and they can get it. Other options are in China but a little...Leave a comment:
-
Hi Dan: assuming I get my Prusa back from the printer hospital and working again, maybe we could print a cowl ring that is hollow to put the weights in....Leave a comment:
-
That's a great attitude to have! It's possible that you're right that they need the regular "techs" to respond to problems like ours with this...Leave a comment:
-
Grossman56,
I'm comfortable without the gyro rec for now but have the Lemon 7ch gyro rec in my P-47. I haven't set it up on gyro but will do...Leave a comment:
-
Just finished installing the Lemon 7 ch Rx with the built in gyro. Forgot what a pain it can be if you don't have three hands! You have to hold down...Leave a comment:
-
I received my 120 - 1/2 oz. weights today. Tomorrow I am adding 4 0z. to see if this helps. I can remove each 1/2 oz if needed. Mounted on the bottom...
Leave a comment:
-
I wanted more roll rate but didn’t want to do tailerons since I am using the stock gyro.Leave a comment:
-
I think I am going with a mid/late 70s theme Syrian camo theme kind of like this. ...
Leave a comment:
Leave a comment: