For all you B 25 restoration fans, this is really something to see:
Grossman56
(Dangerous Dan)...
RC Power Boats and Ships
Collapse
158 results in 0.0094 seconds.
Keywords
Members
Tags
-
If you mean full span flaps, no. The flaps on this are huge and other than for looks I see no reason....Leave a comment:
-
flyjets01@gmail.com replied to Official Freewing 110mm F-35C Lightning II Super Scale EDF Jet Threadin RC JetsEvan
Have you tied full Span Flaperons yet?
I have heard it's problematic on grass but I have never seen it.
I...Leave a comment:
-
Received my E3 yesterday, opened it up and it's BLACK!!!!!!!!!!!! I don't want BLACK, I wanted GREEN!!!!👍 1Leave a comment:
-
Flabob airport called. They really wanted us to be there. They will clear out a hangar for us to use. So the program will be run as planned. Please...Leave a comment:
-
Don't have first hand knowledge fitting one in the NF, but I have done on a Heng Long. The MFU seems to be the same; same sockets, same circuits, so I...Leave a comment:
-
I don’t think a 3- or 4-layer hybrid machine has ever been wound anywhere in the world for hobby so I’m going to try it. For easy routing, it seems...
Leave a comment:
-
-
14 years ago.....
Phil Thomas SS45
Motor: castle 1717
Battery 6s lipo
Inverter: Hydra Ice HV 200 v2
...Leave a comment:
-
In case anyone wants to know about the MCB-e ribbon cable pin out. I pulled the flap wire from the MCBe and put them directly into my receiver to have...Leave a comment:
-
Thanks Evan, your posts are always really helpful; I’ve never looked into that before....Leave a comment:
-
-
These anvils are used to make different amounts of progressive pitch. They are held rigidly in a machinist vise & a dead blow rubber mallet is used...
Leave a comment:
-
C-20 beryllium copper props are annealed & clamped in pitching blocks in a vise.The propeller blades can be easily twisted to the required pitch after...
Leave a comment:
-
The material used in the pitching blocks is West System 105 epoxy resin; 205 fast hardener; & a very large amount of 404 high density filler. The...
Leave a comment:
-
The pitching blocks use dowel pins for alignment. When the pitching blocks are closed in a vise, the propeller blades are held securely for pitching up...
Leave a comment:
-
Pitching blocks can be made of wood but metal last forever.
~JA~...Leave a comment:
-
Your assumption is wrong. The F22 and f35 have very different ESCs and BECs with the 14S capable ones in the F35. The BEC has a label on it that has 5V...Leave a comment:
-
Nothing in the manual but when I purchased a new leg for my 90mm F22 it had a sticker saying 5v-5.5v so I will assume the F35 is the same, thanks....Leave a comment:
-
Completed the build. Final weight was 9.44 lbs. Even at that weight, I like the way it flies. Quick but easy to fly, stable. No gyro (no religion...
Leave a comment:
-
- I’m sorry I took the time to check and post. Please disregard my post.
Leave a comment:
-
If there is no Pre-Flight Check in the Manual then because the PNP version comes with the power system pre-wired, it looks like the Freewing F-35C User...Leave a comment:
-
Try posting it as a Zip-file. -
NF M4A3E8.
I was just wondering is there an aftermarket smoke and barrel flash unit compatible with the receiver in this model? -
Flew my 3rd flight today with 4 oz. of lead in the cowl. Wind was 5-6 mph with gusts up to 12 mph. I dialed my aileron low rates to half of the recommended...Leave a comment:
-
"This magnetic prop balancer can be leveled with three set screws accessible from the top of the balancer. A hardened precision ground CONCENTRIC...
Leave a comment:
-
"All these propellers have been hardened after annealing to allow pitching. Anneal C-20 beryllium copper by heating to 1450 deg. F (dull red) in...
Leave a comment:
-
I also have an ABC speed worksheet for the props but the site is not letting me post an excel extension 😕Leave a comment:
-
Thank you for posting this. Great information, Sir. -
Hi Christian,
I largely agree. At high speed, current is limited by the available voltage budget:
V=EbackEMF+IR+L(dt/dI)​
...Leave a comment:


Leave a comment: