149 results in 0.0095 seconds.
-
If you mean full span flaps, no. The flaps on this are huge and other than for looks I see no reason.... -
flyjets01@gmail.com replied to Official Freewing 110mm F-35C Lightning II Super Scale EDF Jet Threadin RC JetsEvan
Have you tied full Span Flaperons yet?
I have heard it's problematic on grass but I have never seen it.
I...Leave a comment:
-
Received my E3 yesterday, opened it up and it's BLACK!!!!!!!!!!!! I don't want BLACK, I wanted GREEN!!!!Leave a comment:
-
Flabob airport called. They really wanted us to be there. They will clear out a hangar for us to use. So the program will be run as planned. Please...Leave a comment:
-
ethonbrooks0707 started a topic What Do Aerospace Engineers Do? Understanding Aircraft Design and Flight Technologyin RC JetsWhat Do Aerospace Engineers Do? Understanding Aircraft Design and Flight Technology
Aerospace engineering is an exciting field that combines aircraft design, aerodynamics, propulsion systems, and advanced technology. Aerospace engineers... -
Don't have first hand knowledge fitting one in the NF, but I have done on a Heng Long. The MFU seems to be the same; same sockets, same circuits, so I...Leave a comment:
-
I don’t think a 3- or 4-layer hybrid machine has ever been wound anywhere in the world for hobby so I’m going to try it. For easy routing, it seems...
Leave a comment:
-
Wo ist dieser T4 Budweiser Lucas?🙈
Danke,
Hubert...Leave a comment:
-
14 years ago.....
Phil Thomas SS45
Motor: castle 1717
Battery 6s lipo
Inverter: Hydra Ice HV 200 v2
...Leave a comment:
-
In case anyone wants to know about the MCB-e ribbon cable pin out. I pulled the flap wire from the MCBe and put them directly into my receiver to have...Leave a comment:
-
Thanks Evan, your posts are always really helpful; I’ve never looked into that before....Leave a comment:
-
...Leave a comment:
-
These anvils are used to make different amounts of progressive pitch. They are held rigidly in a machinist vise & a dead blow rubber mallet is used...
Leave a comment:
-
C-20 beryllium copper props are annealed & clamped in pitching blocks in a vise.The propeller blades can be easily twisted to the required pitch after...
Leave a comment:
-
The material used in the pitching blocks is West System 105 epoxy resin; 205 fast hardener; & a very large amount of 404 high density filler. The...
Leave a comment:
-
The pitching blocks use dowel pins for alignment. When the pitching blocks are closed in a vise, the propeller blades are held securely for pitching up...
Leave a comment:
-
Pitching blocks can be made of wood but metal last forever.
~JA~...Leave a comment:
-
Your assumption is wrong. The F22 and f35 have very different ESCs and BECs with the 14S capable ones in the F35. The BEC has a label on it that has 5V...Leave a comment:
-
Nothing in the manual but when I purchased a new leg for my 90mm F22 it had a sticker saying 5v-5.5v so I will assume the F35 is the same, thanks....Leave a comment:
-
Completed the build. Final weight was 9.44 lbs. Even at that weight, I like the way it flies. Quick but easy to fly, stable. No gyro (no religion...
Leave a comment:
-
- I’m sorry I took the time to check and post. Please disregard my post.
Leave a comment:
-
If there is no Pre-Flight Check in the Manual then because the PNP version comes with the power system pre-wired, it looks like the Freewing F-35C User...Leave a comment:
-
Try posting it as a Zip-file. -
NF M4A3E8.
I was just wondering is there an aftermarket smoke and barrel flash unit compatible with the receiver in this model? -
Flew my 3rd flight today with 4 oz. of lead in the cowl. Wind was 5-6 mph with gusts up to 12 mph. I dialed my aileron low rates to half of the recommended...Leave a comment:
-
"This magnetic prop balancer can be leveled with three set screws accessible from the top of the balancer. A hardened precision ground CONCENTRIC...
Leave a comment:
-
"All these propellers have been hardened after annealing to allow pitching. Anneal C-20 beryllium copper by heating to 1450 deg. F (dull red) in...
Leave a comment:
-
I also have an ABC speed worksheet for the props but the site is not letting me post an excel extension 😕Leave a comment:
-
Thank you for posting this. Great information, Sir. -
Hi Christian,
I largely agree. At high speed, current is limited by the available voltage budget:
V=EbackEMF+IR+L(dt/dI)​
...Leave a comment:
Leave a comment: