Freewing Su-35 Twin 70mm 12 blade

[Airguardian]

[Airguardian]

Happy New Year to all Flanker lovers!

[Airguardian]

This is getting better and better!

[shortround91]

And then some more... :D

Wish they offered the SU35 or better yet the SU30 yes I know FMS makes the SU27/J11 but it’s heavy looks amazing just to costly for what I wanna do with one

[Airguardian]

And then some more... :D

[Airguardian]

5 years later, my Su-35 is finally back!
Took me long enough, lol.

[Airguardian]

[Airguardian]

Some more! :D

[Airguardian]

[Reptielenfreak]

Hard to say if you cant buy it anymore haha

[kallend]

Still hard to beat the SU-35.

[Airguardian]

Old 2019 flights I hadn't posted yet :)

[kallend]

Old stuff I hadn't posted yet ( :

What fans in there.

[Airguardian]

Old stuff I hadn't posted yet ( :

[Airguardian]

[shortround91]

Maybe so I’ve watched him so many times, wild stunts on many different platforms just props where there well deserved

[kallend]

Killer flights as always

In no way wishing to deny Jando's piloting skill, but the SU 35 invites any pilot to try that stuff, and it complies. It just does it!

[shortround91]

Killer flights as always

[Airguardian]

[paulrkytek]

Ok so I finally got around to making my latest version of the SU35 from all the spare body parts I had hiding in the loft and transferring most of the hardware from Sharp Nose Su. So it has the twin fms 3060 1900kv units I have used on the previous models, twin 80amp Hobbywing escs, separate BEC run on 2s 600mah lipo, Hobby Eagle A3 Super4 gyro on tailerons, ailerons and vts. and It did not need much aileron movement with the tailerons. All up weight with 820gm Admiral 5100mah 6s lipo comes in at 3550gms. I have uprated the mains oleos and wheels and use 5mm pins and have added a 13mm thick ply triangular restrain to the rear of the mains legs as per photo Hard to see with matching paint.. The nose oleo has larger, better wheels for my grass runway and is backed up with a 13mm thick ply triangular restraint set into the original groove for the stock restraint. Setup is basically as Air Guardian build and setup video including VT alignment, battery compartment mods, uprated stab servos etc. etc. I also have some additional air into the top of the battery bay as per 2nd photo below. Maiden flights went well at the weekend and I will be out again tomorrow !!!.