Freewing/Hobbywing Skywalker V2 reversing ESC - programming

Collapse
X
Collapse
First Prev Next Last
 
  • Time
  • Show
Clear All
new posts

  • kallend
    replied
    Originally posted by Sotm

    This will NOT/does NOT work with the Freewing 100AMP reversing ESC!!! Won't even show selections on display!!
    Oh yes it does.

    Works fine with the 80A Freewing reversing ESC. I bought one from Motion just 2 weeks ago and programmed it tonight using the Hobbywing card.

    It is VERY fussy about the order in which you plug things in. If you don't get it right it doesn't work. Follow the Hobbywing instructions exactly.

    EDIT: Just tried it with the Freewing 100A reversing ESC in my Avanti. Worked fine there too. Image shows reverse brake enabled.



    Click image for larger version  Name:	IMG_0059.jpg Views:	0 Size:	85.3 KB ID:	409838



    Clearly you or your informant connected one up incorrectly.

    Leave a comment:


  • kallend
    replied
    MotionRC no longer even lists Freewing ESCs except as replacement parts.

    Shop RC airplane and helicopter ESCs at Motion RC. Find brushless electronic speed controllers from 6A–200A with SBEC/OPTO options for reliable motor control.


    I wonder what's up with that?

    Leave a comment:


  • Sotm
    replied
    Originally posted by kallend
    Update: I contacted Hobbywing and the response was that the correct card for the Skywalker V2 (and presumably the Freewing reversible) is:



    Although the Skywalker is not listed on that product page.
    This will NOT/does NOT work with the Freewing 100AMP reversing ESC!!! Won't even show selections on display!!

    Leave a comment:


  • Olivier_
    replied
    Originally posted by Olivier_


    How do you connect the servo tester on the ESC ?
    Could you send a photo please ?
    It's good, I managed to wire the ESC to a servo tester and enter programming mode !
    Fortunately I came across your solution because MotionRc told me that the ESC was defective !
    thanks !
    now I have to find a solution to calibrate from the radio because it is a twin-engine plane with 2 ESCs​

    Leave a comment:


  • Olivier_
    replied
    Originally posted by kallend
    The new FW reversing ESC (which appears to be the same as the Hobbywing Skywalker V2) is in several new and updated EDFs from Freewing.

    If trying to program it with the programming card, the current one listed on MRC's site doesn't work. No new programming card is listed yet.

    If programming the ESC using the transmitter method and using a Spektrum transmitter, be aware that the default Spektrum pulse length at full throttle (1.9ms) may not be long enough to trigger entry to programming mode. On a Hobbywing I couldn't even enter programming mode when increasing the Spektrum's throttle channel "travel" to its maximum. I had to use a servo tester with pulse length 2.2ms before I could get the ESC into programming mode.

    If anyone knows of a programming card that works with the new ESCs, perhaps they would let us know.

    How do you connect the servo tester on the ESC ?
    Could you send a photo please ?

    Leave a comment:


  • rjhuyck
    replied
    Thank you.

    Leave a comment:


  • kallend
    replied
    Originally posted by rjhuyck
    I would like to have the reverse switch not active unless the gear are down. When the plane is flying and the gear is up, if I accidentally move the reverse switch, nothing will happen.
    Gear up - reverse switch inactive;
    Gear down - reverse switch active.
    How do I program a mix to do that?
    If you aren't using Flight Modes for something else already, I'd use flight modes rather than a mix.

    Also you might consider the push button switch for reverse, which you are unlikely to push by accident.

    If you must do it with a mix, on the iX12 I think you'll need two mixes, each with the gear switch as the controlling switch. One will mix the reverse switch to the reverse channel when the gear switch is in the "down" position. The other will mix "ON" to the reverse channel when the gear is up. The rates will be plus or minus 100%, depending on what your ESC wants to see for reverse, and what switch positions you use for gear up and gear down, so you would need to experiment with them.

    To use flight modes, go to flight mode setup, select the gear switch and reverse swtich as the two switches, and fill in the flight mode table with FM1 in all positions of the switches EXCEPT when the gear is down and reverse is selected, where you put a "FM2".

    You can then use Digital Switch Setup, select Flight Mode, and set FM1 to -100% and FM2 to +100% (or vice versa, depending on your ESC)

    Next go to Channel Assign, and assign Flight Mode to your reversing channel.

    Go to the monitor screen to check that everything is working correctly BEFORE going live in the model, and remove the prop before testing.

    Done,

    Leave a comment:


  • rjhuyck
    replied
    I would like to have the reverse switch not active unless the gear are down. When the plane is flying and the gear is up, if I accidentally move the reverse switch, nothing will happen.
    Gear up - reverse switch inactive;
    Gear down - reverse switch active.
    How do I program a mix to do that?

    Leave a comment:


  • Evan D
    replied
    Make the gear switch the switch that activates the channel your gear are on. You may even be able to Y it to the gear slot (5).

    If you mean to have a safety where you can't activate reverse unless your gear are down you'll have to do a mix from the gear channel to the channel you have reverse on.

    Leave a comment:


  • rjhuyck
    replied
    I would like to have the reverse only be active when the gear is down. I have a Spektrum iX12 transmitter. How do I set this up?

    Leave a comment:


  • Wingnutz
    replied
    I seem to have solved my no-reverse problem.
    I simply changed the order of unplugging leads after programming to unplug the battery first, then the programming card and re-bind. Worked on four successive Skywalker V2’s, none of which would reverse on several previous attempts.
    Anybody explain what’s going on here?

    Leave a comment:


  • Wingnutz
    replied
    Originally posted by Evan D
    Shouldn’t. Is it programmed for reverse? I have gotten different programming settings in ESCs before.
    Programmed to the same settings as the last five I did…according to Part 6 of the instructions with the ESC.

    Leave a comment:


  • Evan D
    replied
    Shouldn’t. Is it programmed for reverse? I have gotten different programming settings in ESCs before.

    Leave a comment:


  • Wingnutz
    replied
    Wingnutz
    Bill Quantock's Avatar
    Canada, ON, Kawartha Lakes
    Joined May 2009
    517 Posts
    Will submerging a Skywalker v2 in Corrosion-X stop the reverse function? Corrosion-X was drained from ESC before testing reverse function. This is the fifth Skywalker v2 I’ve programmed for reverse but the first one I’ve tried to waterproof with Corrosion-X…and the first one that doesn’t reverse. ESC runs the motor but I can’t get it to reverse. Help!
    ​

    Leave a comment:


  • kallend
    replied
    Originally posted by rjhuyck
    Thanks for the help. I thought I read that the ESC default setting is thrust reverse off. If I don't have to program the ESC that would be great.
    For future reference, the Freewing labelled reversing ESC is the same hardware as the Hobbywing Skywalker v2, and uses the same programming box. However, the Hobbywing comes with reversing disabled, and Freewing comes with it enabled. The default timing and LVC may be different too.

    Leave a comment:


  • Evan D
    replied
    Maybe if you buy it alone but all have come with the reverse enabled for me.

    Leave a comment:


  • rjhuyck
    replied
    Thanks for the help. I thought I read that the ESC default setting is thrust reverse off. If I don't have to program the ESC that would be great.

    Leave a comment:


  • Evan D
    replied
    No programming of the ESC, plug the lead in a slot and assign a switch to that slot with -100/+100.

    Leave a comment:


  • rjhuyck
    replied
    My Freewing T-33 was delivered yesterday. I was surprised to see that the ESC has a connection labeled Reverse Brake. How do I program it to work? Does the programming card listed in response #3 above work? Where do I connect the reverse brake lead? And how do I set up the transmitter? This will be the first time that I will need to program an ESC. Most of my planes are gas or glow.
    I have a Spektrum iX12 transmitter and a AR8360T receiver.

    Leave a comment:


  • santanig5
    replied
    Hi all,
    I purchased a skywalker V2 100A ESC for my Freewing T-33 but am unable to reverse to work.
    I am using a Spektrum NX10 Tx and AR8360T receiver.
    I have the programming card so changes are not an issue.
    When I program the breaking to reverse it will not initialize, the motor, no matter what sw I assign it too.
    I have the same setup in another EDF and have everything setup exactly the same, however this one does not work.
    Any help would be appriceated.

    Leave a comment:

Working...