Official Freewing 64mm F-14 Tomcat Twin 64mm EDF Jet Thread

[Evan D]

You get three positions on the 80?

[xviper]

For this F-14, I have the wing sweep on my left slider (NX10). On my 80mm F-14, it's on what is normally the flight mode switch (3-position) but I do NOT stop in the middle even though I can. Stopping the wing in the middle (for me) has a tendency to change the required trim in that position. Even with the slider, I try to do the sweep in one smooth sweep. The 64mm, is more forgiving to changes in wing position (may have to do with the gyro and/or flight controller). With the 80mm, I have trim related to flight modes, which is also dependent upon wing position. It's just easier to not have a mid position for the sweep.

[StevenR]

Question setting up my new F14 64mm, what are you guys using for transmitter switch for the swing wings? I’m using a Spektrum NX10 I’m thinking of using a 3 position switch any suggestions on setting up the different swing positions?

[xviper]

The 64mm F-14 is on the table. Surgery to begin shortly for the organ swap. Just snowed again today, so no real rush to get it done. Take out some screws, have a nap, take out some ball links, repeat as necessary.
:yawning_face::sleeping:

[kallend]

Just unpacked 2 sets of V2 wings from RCC. Very sturdy packaging. Raymond builds a custom foam box for them. Ours came with the longer pushrods and covering for the servo wire channels. Saved >25 bucks over waiting for Motion to get stock.
Several sellers on AliEx are selling them, too. Some are tricky in that they don't specifically mention that they are selling V1 wings. I've had experience with a couple others and their business practices are a bit dubious. End result would have been a higher price than what RCC offered..

Raymond won't ship large items to the USA right now.

Aliexpress is now out of stock.

Motion is out of stock.

[xviper]

Photo of undersides of the V2 wings, something that has not been clearly shown. This also explains why one servo has to be reversed. The little package in the middle contains the Longer pushrods and wire channel tape.

[kallend]

The last shipment was received at Motion RC on February 6th and sold out on February 10th. I just spoke with purchasing and it looks like it's expected to take another 3-4 months to get in stock in the US warehouse.

That will make it some 7 - 8 months altogether some of us have been waiting. Even Hobbyking didn't keep me waiting that long for parts.

:frown:

[jbaartz]

Considering that I am on the "Notify when in stock" list since last November and heard nothing, that is very annoying.

During the website transition there was an issue with the back in stock notifications and a different platform had to be implemented. It was offline for a bit during that time and some shipments missed getting their notifications sent out. It's working correctly now and I believe that all of the old data was carried over, but it wouldn't hurt to sign up for it again.

[xviper]

April was old info. I guess it's more like 3 - 4 months.

[xviper]

Just unpacked 2 sets of V2 wings from RCC. Very sturdy packaging. Raymond builds a custom foam box for them. Ours came with the longer pushrods and covering for the servo wire channels. Saved >25 bucks over waiting for Motion to get stock.
Several sellers on AliEx are selling them, too. Some are tricky in that they don't specifically mention that they are selling V1 wings. I've had experience with a couple others and their business practices are a bit dubious. End result would have been a higher price than what RCC offered..

[Evan D]

Same plus being told differently

[kallend]

The last shipment was received at Motion RC on February 6th and sold out on February 10th. I just spoke with purchasing and it looks like it's expected to take another 3-4 months to get in stock in the US warehouse.

Considering that I am on the "Notify when in stock" list since last November and heard nothing, that is very annoying.

[jbaartz]

Still no V2 wings at Motion.

Coming up on 4 months now.

The last shipment was received at Motion RC on February 6th and sold out on February 10th. I just spoke with purchasing and it looks like it's expected to take another 3-4 months to get in stock in the US warehouse.

[kallend]

Still no V2 wings at Motion.

Coming up on 4 months now.

[Evan D]

Interesting as one rep said they came in late last week and would be available end of this week or early next and another rep said they just got another shipment when asked about parts for the new P-51… guess we just need to keep hitting refresh.

[handyman220]

That’s what he said and they should show later this week or early next. Always possible he was blowing smoke too.

I was just told April will be the next shipment We will have to wait and see.

[xviper]

Actually the reassessment was whether to get the wings at all. Buying from Motion isn’t a consideration, for precisely the reasons you pointed out. A while back I calculated the cost to my door of getting the F4 Phantom: from Motion I’d be looking at about $1500; from RCC or Ali $1000-$1100. Not Motion’s fault, it’s the shipping & currency rates.

The wings cleared customs and should be delivered today. That's 4 days from RCC. Brokerage, taxes, fees, etc ................. 15 Canuck bucks. You can just guess what it would have been if it was FedEx or UPS.

(Well, actually I can give an example.) Not quite on par in terms of declared value, but I bought my Ares from MotionRC not long ago. Brokerage, fees, taxes and taxes on fees came to $114.00. At about the same time frame, I bought the twin 80mm MiG29 from RCC (a much more expensive plane than the Ares). ALL brokerage costs ......... $19.00. Of course, I only had to pay for shipping from RCC once.

[kallend]

Keep hitting refresh John

Even if they get some, I wonder how fast they'll sell out. Last batch they had apparently went almost instantly.

[Evan D]

Keep hitting refresh John

[kallend]

That’s what he said and they should show later this week or early next. Always possible he was blowing smoke too.

Not showing yet.