I plan to take some time with this build. So, I'll update as mods and details are added.
We'll start with the plan: The goals is to build an IR battler for the FRAG RC Tank Club battlefield that can model a build on a budget for beginners. So, I bought this 6.0 King Tiger with steel gears, 360 rotation, and Airsoft with Recoil. While a stock 6.0 can be built to battle without recoil, I thought I'd see what could be done with a slight budget upgrade. Thus, this KT will have servo recoil on a 6.1s board, (I'll sell the 6.0 to make up some of the cost.)
Step 1: speaker upgrade: This is a Visaton FRS-7-4 (4ohm 2.5") speaker in a 3D printed enclosure in place of the smoke unit. (I prefer sound over smoke). While the stock speaker is 8ohms, I've never had a problem using a 4ohm on a Heng Long motherboard.
We'll start with the plan: The goals is to build an IR battler for the FRAG RC Tank Club battlefield that can model a build on a budget for beginners. So, I bought this 6.0 King Tiger with steel gears, 360 rotation, and Airsoft with Recoil. While a stock 6.0 can be built to battle without recoil, I thought I'd see what could be done with a slight budget upgrade. Thus, this KT will have servo recoil on a 6.1s board, (I'll sell the 6.0 to make up some of the cost.)
Step 1: speaker upgrade: This is a Visaton FRS-7-4 (4ohm 2.5") speaker in a 3D printed enclosure in place of the smoke unit. (I prefer sound over smoke). While the stock speaker is 8ohms, I've never had a problem using a 4ohm on a Heng Long motherboard.
Comment