Official Freewing T-33 Shooting Star 80mm EDF Thread

[Rucky]

Thanks a lot! Here are a couple of files...

Thanks Radar-Guy for your work with the 3DPUP. Because I have already prepared double headlights

[Jackcannon]

New addition to the fleet. Loving the T33!

[crxmanpat]

I'm just waiting for them to release the quad 90mm 747!

[T-CAT]

Yeah, I'm not doubting Andy (he's seems like a good guy, and runs a nice business, and am happy to see him pick up HSD products), rather it's HSD products that give me pause.

[dahawk]

Knowing Andy and his experience in both turbines and edf's I'm sure hell do a good job. Already has a warehouse running in Southlake, TX( DFW)

[T-CAT]

My observation of hsd at our field is, they're always are BIG, lacking power without a fan swap on an already expensive plane and always seem to be waiting for some part they can't get, also seem to always have some scale issue like the wing on their T-33

Yeah, even with a power upgrade, they are still mediocre performers. I've seen so many spend extra dough on a slightly larger and more powerful Jetfan, and it is still underwhelming, but they thought it would be absolutely incredible.

It sounds like they are starting to improve various aspects like the power system in the PNP's, parts availability, etc., so we'll see how it goes in the future.

[Quickstop]

My observation of hsd at our field is, they're always are BIG, lacking power without a fan swap on an already expensive plane and always seem to be waiting for some part they can't get, also seem to always have some scale issue like the wing on their T-33

[T-CAT]

I wish HSD the best and hope they continue to improve upon their aircraft, design new aircraft, and provide a better service now with their new US partnership. I own their Super Viper and in some ways I like their engineering, while in other ways I don't like it at all. I may own another HSD product in the future, but I'm not sure. I don't think I'm impressed enough with their current products that it would make me excited to immediately purchase another. We have a lot of HSD products that have flown at our field, EDF and turbine, and it's allowed me to base an opinion on variety of their aircraft. Maybe they'll release something that will blow my socks off, who knows.

[DaFlyingSnek]

Thanks a lot! Here are a couple of files...

Thank you very much! Could you please explain where each piece needs to go? For example the aft louvers and how to put together the light strut holder? Again, on behalf of all scale modelers, thank you!

[xviper]

I saw the new HSD T-33 this week. The first one in the US. Still in final testing, Wow ! She's a beaute. 120mm EDF. 15#'s thrust. Again, Wow ! Same airframe as their turbine version. Makes the Freewing look pale in comparison but it's also 3X the cost. A completely different category. Hopefully, Andy from RCjetwerx will bring it to Jet Jam in June for all to see.

I've often drooled at the sight of some of HSD's offerings but for me (and maybe for many) my Freewing counterparts can be as pale as sun bleached sea shells on the sea shore in Tahiti. I play in the minor league ball parks.

[Radar-Guy]

All your 3D projects are looking fantastic!!! When and where are you going to publish them? Many of us are extremely excited to add these to our models! Thank you very much for what you're doing and making them public!

Thanks a lot! Here are a couple of files...

[dahawk]

Have now witnessed 4 T-33's at our field. All flew great. But 3 out 4 had LG(Mains) fall out on landing. Poor glue job in China. Nevertheless, I bit the bullet and order the German version. Arrives Friday. Maiden on Sunday.
With the coronavirus still looming and no end in sight, getting shipments out of China is going to be difficult for a while. Of course this crisis applies to just about anything. The Chinese Supply Chain is a mess.

I saw the new HSD T-33 this week. The first one in the US. Still in final testing, Wow ! She's a beaute. 120mm EDF. 15#'s thrust. Again, Wow ! Same airframe as their turbine version. Makes the Freewing look pale in comparison but it's also 3X the cost. A completely different category. Hopefully, Andy from RCjetwerx will bring it to Jet Jam in June for all to see.

[DaFlyingSnek]

Cockpit work in progress...

All your 3D projects are looking fantastic!!! When and where are you going to publish them? Many of us are extremely excited to add these to our models! Thank you very much for what you're doing and making them public!

[Radar-Guy]

Thanks RG, This will add to the details I have planed. What CAD are you using and I'm guessing this is going to be an .STL as well?

Fusion 360 and yes!

[flazz]

Thanks RG, This will add to the details I have planed. What CAD are you using and I'm guessing this is going to be an .STL as well?

[Elbee]

Cockpit work in progress...]

RG, Beautiful Work, Sir, as always. Best, LB

[Radar-Guy]

Cockpit work in progress...

[TonyGagJr]

Perfect, great idea with the shelf for the RX. Thanks!!

[e4dragongunner]

Haha... Great Minds... And Love that JETI.... Flew the assist in my Extreme Flight Edge for the 1st time. JUST WOW!!!

[WarbirdFan66]

Still have to finish painting the nose and apply the graphics, but I am very pleased at the way it is coming along. The colour is off because of the fluorescent lights. Still amonth before the field is free of snow so no rush.

Personally, not my color (for sure), still an excellent paintjob mate, I'm sure it will look terrific with the decals on it...nice work