Got mine put together, no shipping damage, everything fit perfect and the finish is really nice. I've started physically checking every solder connection and all were solid but the motor wasn't plugged into the ESC, all three wires completely loose.
I noticed that the flaps were about 4mm off at full position, I was able to make them match by moving the port side to the middle hole on the control horn.
With that really long nose strut I decided to put a wire tie around the front end of the retract for a little extra strength, it also holds the wires in place.
I noticed that the flaps were about 4mm off at full position, I was able to make them match by moving the port side to the middle hole on the control horn.
With that really long nose strut I decided to put a wire tie around the front end of the retract for a little extra strength, it also holds the wires in place.
Comment