Can somebody please tell me the correct way to install the Track PINS when using DUCKBILLS. I bought Mato T-49 metal tracks with duckbills for my HL sherman tank. Do the KNURLED ends go toward the tank? Are the pins supposed to go through the duckbills first, then through the link? Or are the duckbills supposed to be "pushed" on after the pins and links are installed? I appreciate any help.
Announcement
Collapse
No announcement yet.
Help With Mato Duckbill Tracks
Collapse
X
-
Originally posted by hsdtech View PostCan somebody please tell me the correct way to install the Track PINS when using DUCKBILLS. I bought Mato T-49 metal tracks with duckbills for my HL sherman tank. Do the KNURLED ends go toward the tank? Are the pins supposed to go through the duckbills first, then through the link? Or are the duckbills supposed to be "pushed" on after the pins and links are installed? I appreciate any help.
Pictures from older Mato picturial instructions. They may or may not be applicable to your newer T49 metal track with duckbill. PM me with your email address if you want copies of them. You may be able to get more up to date support from the Mato distributor in Canada.
Comment
-
Thanks guys. What happened was that I needed to add a link to the tracks to fit the HL sherman. I pushed a pin out, and while handling the tracks to add the link, several duckbills came off of several other track links and they fell apart. I don't know why or how. I put a few back together but I am having a real hard time getting them to stay together. The duckbills continue to want to come off. Maybe the pins are a little short? Or maybe they used glue to hold them on?
When installing the pins I put the knurled end toward the tank. Then when adding the duckbills I have to give it several good blows to make them stay on the pins. If the duckbills don't stay on the pins the whole link assembly will easily come apart. It is very frustrating as all I was doing was trying to add one link to the tracks.
Comment
Comment