3d Printed Part Sets - Freewing F-4D Phantom II

[Elbee]

Just finished my cockpit, the parts look really good and it was a fun project now to do the nozzles and the pilots are from Jet Hanger Hobbies.

Derek, That looks outstanding. Great work. Best, LB

[dkalwishky]

Scratchbuild. I posted plans on RCGroups under my blog. Im actually considering selling it to make room for my current A333 project.

If you decide you are going to sell it let me know. I'm interested and being in Iowa I can drive over to get it.

[Dirty Dee]

Is that 145 a scratch build or a kit? I would love to get a hold of a CRJ900.

Scratchbuild. I posted plans on RCGroups under my blog. Im actually considering selling it to make room for my current A333 project.

[fhhuber]

Just vampire-downloaded all the printer files....

Now if they will start letting us order the Ghost Grey....

[Tooeleflyboy]

Just finished my cockpit, the parts look really good and it was a fun project now to do the nozzles and the pilots are from Jet Hanger Hobbies.

[apmech1]

Here is the centerline tank. 94g with ABS and printed in 3 parts. I should have it up on Thingiverse tonight.

Is that 145 a scratch build or a kit? I would love to get a hold of a CRJ900.

[apmech1]

Not to be duplicating efforts, but I made a 600 gallon centerline tank as well. Bartered with dlxpkg for a pair of wing bags for my A-10 in return for a printed centerline tank:)

Some design differences from apmech1's, like utilizing the stock FW hardware as well as I added the aft sway braces. Will upload to thingiverse after I finish printing them and make sure they are good.

I wish I would have thought of putting the females on the tank instead of the males.... great Idea! And to Steve's idea to put 2 on there. I will probably re-do some of my parts incorporating these changes as well.

[Wobisch]

At the top of the page you can change the language to english.

[Dirty Dee]

Is it allowed to post a link to a webshop?

Absolutely! No issues posting webshop links

[Elbee]

Hi this is a special ABS S filament which has less shrink rate.

W0-B, Thank you. I am familiar with ABS-S filament. Parts look great.:Cool:Best, LB

[Wobisch]

Biggest progress I made using this ABS S filament combined with a Lokbuild adhesion plate and a cover for my ultimate 2+. I also switched from Cura to Simplify 3D Software. Since then I can do much better parts. I had to learn using less temperature (230°) instead of 250° I started with. Build plate is heated up to 90° instead of 100° to avoid "Elefant Foot".

Since then printed a lot of DirtyDee's Parts. I really appreciate his work for the community.

[Wobisch]

Hi this is a special ABS S filament which has less shrink rate. This allows to print long pieces lying on the print plate. I don't know because I am new in 3D printing, but I guess this is a local brand here in Europe or Switzerland. Is it allowed to post a link to a webshop?

[Dirty Dee]

I have printed the center tank and I am super excited. My new ABS with anti warping technology works fantastic. Thank you Chris.

Looks, great! What brand ABS are you using?

[Elbee]

My new ABS with anti warping technology works fantastic.

Wo-B, What is 'anti-warping' technology? A different formula or a technique you have discovered? I must know.Best, LB

[Wobisch]

I have printed the center tank and I am super excited. My new ABS with anti warping technology works fantastic. Thank you Chris.

[vduniec]

Here is the centerline tank. 94g with ABS and printed in 3 parts. I should have it up on Thingiverse tonight.

Love all the stuff you're posting on Thingiverse. Thanks for sharing! I'm relatively new to the 3d printing scene. Can I print this tank in PLA? What are the advantages of one over the other?

[Dirty Dee]

Here is the thingiverse for the 600 gallon centerline tank. I have 2 versions of the tail piece uploaded depending if you want to ad a second attachment hardware or not.

https://www.thingiverse.com/thing:3010216

[Elbee]

Hey Y'all, For those who have been waiting for the Motion RC 3DP F-4 cockpit kit, it is now back in stock. Just received a notification. Best, LB

[Dirty Dee]

Is the 145XR in the background an RC model or a static model? Pretty cool.

It's static until I finish a few repairs:).

twin 50mm, can get a good 6 minutes of flight time on 2650mAh 4S.

[TMoyer]

Here is the centerline tank. 94g with ABS and printed in 3 parts. I should have it up on Thingiverse tonight.

Is the 145XR in the background an RC model or a static model? Pretty cool.