3d Printed Part Sets - Freewing 90mm F-22 Raptor

[RCjetdude]

Yeah, I am going to make an opening canopy... so what! LOL

[crxmanpat]

I have the frame printed as well. Not sure yet if I will tackle that project though.

[Visva11]

I hope the 3dpup main gear door will soon be released.

[Alpha]

Gear doors will probably be uploaded by early next week. The F-22 arrived Stateside two weeks ahead of schedule and we're a little... ...occupied... ... :)

Just to be clear, the main gear door files are unlit --we didn't plan to include a mount for an LED on the interior of these main gear doors, due to the clearance and geometry constraints. They're just plain doors with hinges that will require some DIY to install.

Unless there's enough of you who really wanted lit doors...

[TiredIronGRB]

Yeah, I am going to make an opening canopy... so what! LOL

Of course you are ;)

[Visva11]

Gear doors will probably be uploaded by early next week. The F-22 arrived Stateside two weeks ahead of schedule and we're a little... ...occupied... ... :)

Just to be clear, the main gear door files are unlit --we didn't plan to include a mount for an LED on the interior of these main gear doors, due to the clearance and geometry constraints. They're just plain doors with hinges that will require some DIY to install.

Unless there's enough of you who really wanted lit doors...

Great.
Thanks.
But what do you mean by "unlit" or "lit"?
You mean, lit means including a mounting for landing lights?

[Sotm]

Why are there no links attached to supposed links in the first post for the 3D parts?

[Dirty Dee]

Why are there no links attached to supposed links in the first post for the 3D parts?

They are placeholders

[Sotm]

Where are the links then?

[crxmanpat]

The files are in Post #2.

Or click the link on the F-22 Support page:

https://www.motionrc.com/collections/jets-and-ducted-fan/products/freewing-f-22-raptor-90mm-edf-jet-pnp#support-tab

[Pogo]

I have no access to a printer, unfortunately, and I'm wondering if some kind soul would be willing to print and mail me the canopy frame and cockpit detail parts? I'll certainly pay for your time and shipping costs with PayPal, if that suits. Please note I'm in Ontario, Canada, so there is that slight complication for the shipping. Please PM me, and thank you!
Tom

[C17loadmaster]

I have no access to a printer, unfortunately, and I'm wondering if some kind soul would be willing to print and mail me the canopy frame and cockpit detail parts? I'll certainly pay for your time and shipping costs with PayPal, if that suits. Please note I'm in Ontario, Canada, so there is that slight complication for the shipping. Please PM me, and thank you!
Tom

I have enough of a need for one I should just buy it. If I had one I would print you the parts

[TiredIronGRB]

All you really need to do to this plane is fly it:Cool:

[RCjetdude]

I have no access to a printer, unfortunately, and I'm wondering if some kind soul would be willing to print and mail me the canopy frame and cockpit detail parts? I'll certainly pay for your time and shipping costs with PayPal, if that suits. Please note I'm in Ontario, Canada, so there is that slight complication for the shipping. Please PM me, and thank you!
Tom

Do you have someone to help you with getting the parts printed.

[Pogo]

Not as yet!
Tom

[Radar-Guy]

At first, many thanks for offering these files for free! While waiting for my F-22 here in Germany, I've started printing the cockpit parts on a Prusa i3 Mk3 with a .25 nozzle and I'm pretty happy with the parts that came out so far. But it looks like some announced parts are missing in the published files:

a) Refering to #2, Tutorial 1, Cockpit Set: 3 parts that go aft of the rear section of the seat plus the part shown below the seat's front section
b) Intake Cover Set
c) Pitot and Generator Set

Will those parts be made available as well?

Frank

[Alpha]

At first, many thanks for offering these files for free! While waiting for my F-22 here in Germany, I've started printing the cockpit parts on a Prusa i3 Mk3 with a .25 nozzle and I'm pretty happy with the parts that came out so far. But it looks like some announced parts are missing in the published files:

a) Refering to #2, Tutorial 1, Cockpit Set: 3 parts that go aft of the rear section of the seat plus the part shown below the seat's front section
b) Intake Cover Set
c) Pitot and Generator Set

Will those parts be made available as well?

Frank

Hi Frank, I just uploaded those parts to Post #2. Enjoy! Thanks for your support!

[Alpha]

I airbrushed the interior of the stock canopy with a light coat of Tamiya Clear Gold and Clear Base ( 15% to 85% ). The effect is alright. In all of these pictures, it's the same canopy. It appears coffee colored or golden depending on the viewing angle and sunlight. In the air it's not noticeable. I only dusted the interior lightly since I still want to be able to see the cockpit details.

In the completely opposite direction, perhaps we could stock clear canopies for people who want to see all the cockpit detail perfectly clearly without any degree of tint. If there's enough interest.

[Radar-Guy]

Hi Frank, I just uploaded those parts to Post #2. Enjoy! Thanks for your support!

Hi Alpha,
many thanks! But, errr.., is there an F22StarboardCover file as well?

[Pogo]

I have no access to a printer, unfortunately, and I'm wondering if some kind soul would be willing to print and mail me the canopy frame and cockpit detail parts? I'll certainly pay for your time and shipping costs with PayPal, if that suits. Please note I'm in Ontario, Canada, so there is that slight complication for the shipping. Please PM me, and thank you!
Tom

So I've just, belatedly, realized I can just buy the cockpit parts from Motion when they become available. all I really need is the canopy frame, which they're not offering. As I plan to do an opening canopy, can anyone help?
Tom