New Avios Mig 17 ?

[RanGee]

What a beauty the afterburner looks bad ass.
Please bring out your mig next weekend i will have mine maiden as well, just deactivated the elevator to flap compensation on my tx

looks like power is not an issue at all. still want to put mine on a watt meter and see what kind of power shes putting up

Yeah, she's got plenty of power, this power system is a keeper

[tengarang]

Come on guys!! Group hug???

Bromance

But yeah like to see some footage when you get your rig up in the air.

[tengarang]

Got to maiden mine yesterday, the Mig is such a great flier!
I had to put about 40 clicks of right aileron trim (so is my buddy who maiden his as well). Also, no elevator to flap compensation needed...

What a beauty the afterburner looks bad ass.
Please bring out your mig next weekend i will have mine maiden as well, just deactivated the elevator to flap compensation on my tx

looks like power is not an issue at all. still want to put mine on a watt meter and see what kind of power shes putting up

[gooniac33]

I don't buy these things from anyone. I've never had the inclination to put stuff like this on my planes. But when I do, I make them myself.

Yeah you are a lot like me. I did this back in 2011 when nothing out there was how I wanted it... these were the older 50mm jets.... I still own this plane too!

[thisguy65]

Mines out for delivery too. Hope it get delivered. It rained this morning so I probably can't paint but I can at least check it to make sure everything works and prep it to paint.

Are you going to paint it sliver and red?


I have a EDF unit out of the 90mm F-18 (went down on maiden). Thinking about putting this in the Mig. Wish I knew the data (trust) of the mig unit compare to the F-18. So Evan if you were me would you get the PNP or the ARF+ Mig?

[xviper]

If you purchased your afterburner form the Gooniac before Jan this year, take a look at the postage; yeah it came from me....

I don't buy these things from anyone. I've never had the inclination to put stuff like this on my planes. But when I do, I make them myself.

[xviper]

Well, my MIG is supposed to be out for delivery today. Via Fed Ex. So, the big Fed Ex truck pulls all the way up in the driveway... He sits there for about 6 minutes, never gets out of the vehicle, goes back to the driver's seat and backs out and leaves!!! :frowning: No MIG, no box, no note, nada!!! :rolling_eyes: I hope he comes back today!!! Go figure.....

I've seen these guys (YouTube) throw big screen TV's over a tall fence. At least he didn't do that ............................................ YET! BTW, mine is supposed to be here on Thursday - no discount but free shipping from Oregon. The discount would have been nice to offset the big FedEx bill yet to come. I've got a new FedEx guy. He's quite conscientious with his deliveries to me. I've got cameras all around the front door and I see him reading my notes on where to hide parcels. He's pretty good at it. Unlike some of the other couriers, who just throws it on the ground in plain view of thieves passing by and then rings my doorbell when he doesn't need my signature - makes my dog go nuts.

Come on guys!! Group hug???

I'll group hug with you any day, BUT ordinarily, I avoid such things. :hugging: What, with measles, rabies, STDs, hepatitis A B C D E F ......... and summer flu going around. :mask:

[RanGee]

Got to maiden mine yesterday, the Mig is such a great flier!
I had to put about 40 clicks of right aileron trim (so is my buddy who maiden his as well). Also, no elevator to flap compensation needed...

[gooniac33]

No hugging here.... just heading home to work on my plane!!! I am bummed that I couldnt get it going this weekend... on a mission now!!!

[Hardway]

Come on guys!! Group hug???

[Aros]

Folks THIS SQUABBLE ENDS NOW. Either take it offline or suffer the consequences. This is the final warning for ALL parties involved.

[Evan D]

Mines out for delivery too. Hope it get delivered. It rained this morning so I probably can't paint but I can at least check it to make sure everything works and prep it to paint.

Well, my MIG is supposed to be out for delivery today. Via Fed Ex. So, the big Fed Ex truck pulls all the way up in the driveway... He sits there for about 6 minutes, never gets out of the vehicle, goes back to the driver's seat and backs out and leaves!!! :frowning: No MIG, no box, no note, nada!!! :rolling_eyes: I hope he comes back today!!! Go figure.....

[Hawker_Hurricane]

Thank you!

Thank you for all your hardwork

[Hawker_Hurricane]

Hawker_Hurricane,

like you I probably have put some bad taste in peoples mouths but i stand up for whats right. i dont need followers, I say what i think and im not afraid of saying it, and i will CONTINUE to do so to stand up for whats right.

Glad to see you have some wisdom, without being inside the inner circle and courageous enough to stand up and say something. We need more folks like you, and not feel annoyed or bashful to mitigate the differences between right and wrong.

Life can be tough in an unfair biased world, but I respect what you are doing for Rangee.

[tengarang]

I am aware that im adding some fuel to the fire but lets be realistic

From a very neutral spectator, its really unfair to reply to one person in this case Rangee and ask him to "Please Stop" The other guy(s) are equally at fault. Its comments like this that will not stop anything. As a matter of fact it will do quite the contrary.

As for the afterburners, impartial to any but feel thelightburner has brought value beyond any other competitor in here and outside, seems like there is some fan based biased on the totem pole which I refuse to be apart of. I like what I see and I stick with it.

Hawker_Hurricane,

like you I probably have put some bad taste in peoples mouths but i stand up for whats right. i dont need followers, I say what i think and im not afraid of saying it, and i will CONTINUE to do so to stand up for whats right.

Glad to see you have some wisdom, without being inside the inner circle and courageous enough to stand up and say something. We need more folks like you, and not feel annoyed or bashful to mitigate the differences between right and wrong.

[Hardway]

Well, my MIG is supposed to be out for delivery today. Via Fed Ex. So, the big Fed Ex truck pulls all the way up in the driveway... He sits there for about 6 minutes, never gets out of the vehicle, goes back to the driver's seat and backs out and leaves!!! :frowning: No MIG, no box, no note, nada!!! :rolling_eyes: I hope he comes back today!!! Go figure.....

[RanGee]

I am aware that im adding some fuel to the fire but lets be realistic

From a very neutral spectator, its really unfair to reply to one person in this case Rangee and ask him to "Please Stop" The other guy(s) are equally at fault. Its comments like this that will not stop anything. As a matter of fact it will do quite the contrary.

As for the afterburners, impartial to any but feel thelightburner has brought value beyond any other competitor in here and outside, seems like there is some fan based biased on the totem pole which I refuse to be apart of. I like what I see and I stick with it.

Thank you!

[gooniac33]

If you purchased your afterburner form the Gooniac before Jan this year, take a look at the postage; yeah it came from me....

Yeah thats right. It did come from you. I helped you FOR FREE by putting your stuff out there with all of the people that I have helped here on the forums. I got the money.... moved it all over to you (with no fee or anything) and you did the rest.... Your point? It is getting kinda tiring bro... let it go already. I am here to help people which I have been doing for years on RCG and on here once this forum was started. I have been at this hobby for over 35 years and started working on my own things using brushed escs as switches starting back in 2009 and then with afterburner stuff beginning in 2011. To keep making these accusations is pretty tiring and I have done my best to keep it to myself about how you have made this out to be more than it is... I have no ill will towards you and wish you the best and have not once knocked your product even though you insist on doing that to me. But once you went on your POOR ME kick I had to just leave things where they were because there is no dealing with this mess again... you seem to attract it. Please leave this alone... tired of it and if anyone has issues with me posting what I am doing with afterburners then I apologize. I try to keep it tasteful. If it hasn't been then I am sorry...

[Hawker_Hurricane]

Please stop.

I am aware that im adding some fuel to the fire but lets be realistic

From a very neutral spectator, its really unfair to reply to one person in this case Rangee and ask him to "Please Stop" The other guy(s) are equally at fault. Its comments like this that will not stop anything. As a matter of fact it will do quite the contrary.

As for the afterburners, impartial to any but feel thelightburner has brought value beyond any other competitor in here and outside, seems like there is some fan based biased on the totem pole which I refuse to be apart of. I like what I see and I stick with it.

[Evan D]

Please stop.

OK, I'll edit this to say both sides please stop. I'm not partial to either of them as I haven't bought eithers product and probably won't. It just pisses me off that they are on every thread I visit with the same crap.

If you purchased your afterburner form the Gooniac before Jan this year, take a look at the postage; yeah it came from me....