Originally posted by Radar-Guy
View Post
Announcement
Collapse
No announcement yet.
Official Freewing JAS 39 Gripen 80mm EDF Jet
Collapse
X
-
Originally posted by janmb View Post
Kinda poor example since this is a Swede trying to speak English at the time.
Far better Swedish pronunciation to be heard in this video: https://youtu.be/FWAyPWAUfMU
Leave a comment:
-
Originally posted by janmb View Post
Great job!
Would propose the following changes:
- Lose the aft fins on the nose part. They should not be there.
- The body diameter should probably be increased a tiny tad. The diameter should be almost exactly the same as each of the large vanes.
Leave a comment:
-
Originally posted by Radar-Guy View Post
Far better Swedish pronunciation to be heard in this video: https://youtu.be/FWAyPWAUfMU
Leave a comment:
-
Originally posted by kallend View Post
Would propose the following changes:
- Lose the aft fins on the nose part. They should not be there.
- The body diameter should probably be increased a tiny tad. The diameter should be almost exactly the same as each of the large vanes.
Leave a comment:
-
Originally posted by ridgerunner View PostJust a quick question: Is it pronounced: "grippin" or "gripe'n"?
G + reap (what you sow) + en (as in the last two letters of an egg-laying hen)
In general pronounced far slower than most Americans by instinct would.
Leave a comment:
-
1:9 scale IRIS-T missile to fit Gripen wingtip rails.
1:9 scale IRIS-T missile with lug to fit Freewing Gripen wingtip rail. The nose section has some breakaway parts that look like fins to support it upright while printing. These are not part of the missile - remove after printing. Will need supports. Underwing pylons at https://www.thingiverse.com/thing:4713773
Leave a comment:
-
Originally posted by ridgerunner View PostJust a quick question: Is it pronounced: "grippin" or "gripe'n"?
Maj. Peter “Starbutt” Fällén, Swedish Air Force, demonstration pilot and deputy commander of 71 Squadron, F7 Wing Såtenäs, with a walk around of Saab’s JAS 3...
Leave a comment:
-
Just a quick question: Is it pronounced: "grippin" or "gripe'n"?
Leave a comment:
-
Originally posted by rms View Posthttps://military.wikia.org/wiki/IRIS-T
It was hard to find more than lengt and diameter. I gess you have to stipelate the rest...
I haven't split it up into easily printable parts yet. Let me know if you think it OK and i'll work on the printing.
- Likes 1
Leave a comment:
-
Agree, 3DP pylons would be extra cool.
If anyone does share some, I'll be grateful! :D
Leave a comment:
-
Originally posted by kallend View Post
I can put together a 3D 1:9 scale IRIS-T for the wingtip rails pretty quickly if I can find a 3-view or some dimensions of the fins. I couldn't find anything useful from a quick Google search. I already have the body done.
Do you have anything?
The IRIS-T (Infra Red Imaging System Tail/Thrust Vector-Controlled) is a German-led program to develop a short-range air-to-air missile to replace the venerable AIM-9 Sidewinder found in some of the NATO member countries. Any aircraft capable of carrying and firing Sidewinder is also capable of launching IRIS-T. In the 1980s, NATO countries signed a Memorandum of Agreement that the United States would develop a medium-range air-to-air missile to replace the AIM-7 Sparrow, while Britain and Germa
Leave a comment:
-
The IRIS-T (Infra Red Imaging System Tail/Thrust Vector-Controlled) is a German-led program to develop a short-range air-to-air missile to replace the venerable AIM-9 Sidewinder found in some of the NATO member countries. Any aircraft capable of carrying and firing Sidewinder is also capable of launching IRIS-T. In the 1980s, NATO countries signed a Memorandum of Agreement that the United States would develop a medium-range air-to-air missile to replace the AIM-7 Sparrow, while Britain and Germa
It was hard to find more than lengt and diameter. I gess you have to stipelate the rest...
Leave a comment:
-
Originally posted by janmb View Post
At the very least would love to have an IRIS-T for my wing tips.
Do you have anything?
Leave a comment:
-
Originally posted by kallend View Post
STL files for the underwing rails would be good too.
Would love to sit down and model a bit more myself, just so darn hard to find time these days.
Instead, having something like 4-5 models needing work, building up a nice little backlog.
Leave a comment:
-
Originally posted by janmb View Post
At the very least would love to have an IRIS-T for my wing tips.
And obviously, a couple of Meteors under the wings would be nice too. After all, it is quite likely the most dangerous air to air missile in existence right now.
- Likes 1
Leave a comment:
-
Originally posted by rms View PostDo any have 3D files for weapon to this FW Jas39 in 1:9?
I can see its using many of the same weapons as others figher jet is using.
Leave a comment:
-
Leave a comment: