Think you need both reverse and forward ESC leads plugged in and reverse assigned to a switch for it to function correctly.
Announcement
Collapse
No announcement yet.
Official 64mm Freewing Banshee EDF Sport Jet Thread
Collapse
X
-
Try the following:
Check that all 3 ESC to motor wires are pushed together tightly.
This plane has reverse thrust, right? Check that it's hooked up right. Perhaps you need to either reverse the throttle or flip the reverse switch.
You might want to lower the throttle trim to the lowest position and re-bind if the above doesn't work. If you do this, remember that throttle cut will have to be adjusted, too.
Comment
-
Originally posted by xviper View PostTry the following:
Check that all 3 ESC to motor wires are pushed together tightly.
This plane has reverse thrust, right? Check that it's hooked up right. Perhaps you need to either reverse the throttle or flip the reverse switch.
You might want to lower the throttle trim to the lowest position and re-bind if the above doesn't work. If you do this, remember that throttle cut will have to be adjusted, too.
Comment
Comment