Actually it went from in stock to out of stock in a matter of hours. When I looked earlier today, it was in stock.
Announcement
Collapse
No announcement yet.
Official Freewing 80mm A-4E/F Skyhawk Thread
Collapse
X
-
Woohoo, got my shipping notice for the A-4, ordered the Mig 21 today also thinking the A-4 would be here around the middle of the month but they were both shipped today, next Thursday is delivery for both pkges, going to be a long weekend and work week............:):)
Said I wasn't going to buy anymore 80mm jets..............:Silly:
Comment
-
All - We placed a decal on the outside of the box which directs you to the updated manual, latest CG info, etc. Please make sure you check that URL before you setup your plane as there are lots of good tips for setup.
Of note:
1) The CG location is directly behind the wheel well (as shown in earlier pictures).
2) Admiral 6S 5000 must be pushed all the way forward.
3) Balance your plane at the CG with the gear in the up position and the plane upright - no ordnance connected to the pylons.
4) We recommend your first flights should be without ordnance.
Anyone who missed out on the A4, the next shipment is due around 9/21. ARF+ is also in the same shipment. Thanks everyone!
- Likes 1
Comment
-
I can make a pre-order for ARF+ in the future? Is that something you guys want? We typically don't setup a pre-order for ARF+ but there is really not any particular reason for that.
Currently we have a number of people on the "back in stock" notification list. If I put these in stock for pre-order, everyone on the list is going to get an email as if the ARF+ is in stock. That may confuse some so I don't think it would be a good idea to start a pre-order for the ARF+ now but I can certainly do this in the future.
Comment
-
Couple of minor tips for you all getting ready to Assemble your new A-4's. When installing the Vertical Stab be careful it seats fully as a portion of it will extend into the v groove in the exhaust nozzle area. If you don't get it seated properly one could put in the screw and not actually engage the screw post attached to the fuselage. Check the photos and you will see what I am referring to. Also as you slide the wing on be cautious of the Gun Port as it may not line up perfectly with the leading edge of the wing. I sanded mine down a bit to make sure it cleared OK. If you're not careful you could smash the wing a bit sliding it on. I have attached some photos for your viewing pleasure.3 Photos
- Likes 2
Comment
-
Originally posted by Tom.MotionRC View PostI can make a pre-order for ARF+ in the future? Is that something you guys want? We typically don't setup a pre-order for ARF+ but there is really not any particular reason for that.
Currently we have a number of people on the "back in stock" notification list. If I put these in stock for pre-order, everyone on the list is going to get an email as if the ARF+ is in stock. That may confuse some so I don't think it would be a good idea to start a pre-order for the ARF+ now but I can certainly do this in the future.
My work schedule don't afford me the time to keep a real close eye on the web site. I am on the notification list for when it comes in stock, as long as they don't sell out in 12 hours I should be ok...
Thanks...
Tom
Comment
-
Originally posted by Wayne@MotionRC View PostCouple of minor tips for you all getting ready to Assemble your new A-4's. When installing the Vertical Stab be careful it seats fully as a portion of it will extend into the v groove in the exhaust nozzle area. If you don't get it seated properly one could put in the screw and not actually engage the screw post attached to the fuselage. Check the photos and you will see what I am referring to. Also as you slide the wing on be cautious of the Gun Port as it may not line up perfectly with the leading edge of the wing. I sanded mine down a bit to make sure it cleared OK. If you're not careful you could smash the wing a bit sliding it on. I have attached some photos for your viewing pleasure.
Comment
Comment