Official FlightLine 1600mm B-25J Mitchell PNP Thread

[Kowil35]

The rim is 50 x26 mm from the main gear

[Kowil35]

Wheel maingear tire 85mm x 30mm and the insite wheel (rime) 50 x 26 mm
nose wheel 60mm x 15mm

Grz wilko

[Ian b]

Wheel size

[Fast N Light]

It looks great how it is the box ...now start to build it😊😉

Would you please share the tire diameters? With those I'll start working on some scale 3D printed rims.

[Ian b]

Be aware that the white decals are there but are very hard to see to cut out, you need to angle sheet by a window and you can then see them !!

[Kowil35]

Its ready for takeoff😉😉🙂

[Spad Driver]

Carly Simon singing the Hienz catsup theme song....
. Anticipation....., Anticipation..... it's making me wait!...

[Elbee]

That green glow you can see in the western sky from Europe is because all the pilots in the US are green with envy

Acknowledged and Agreed. ........................., I am desirous of a similar outcome at the soonest possible date. Best, LB

[Lextek]

On my list😎

[Gilatrout]

That green glow you can see in the western sky from Europe is because all the pilots in the US are green with envy

[Kowil35]

It looks great how it is the box ...now start to build it😊😉

[Evan D]

Only place that has them… not even RC Castle yet.

[Kowil35]

Yep motion rc europe

[Spad Driver]

Kowil35!.
YOUR FIRST!.🎉🎆🍻
Congratulations!.
Did it come from motionrc EU?.

[Kowil35]

it is arrived...my B25mitchel

[Jdcrow]

Okay, so we have to wait a bit longer.
Still not going to be all sour grapes about the delay.

Just found something else to do to prep for the B-25's arrival. Looking at the flight and assembly videos I realized that the cowlings are short the correct number of exhaust stacks for a wright twin cyclone R-2600-92 14 cylinder radial!.

So a 3D printer will be used to make additional exhaust stacks to be glued in the proper locations around the cowling.
👍

And some proper wheel hubs too

[Kowil35]

Out for dilivery tomorrow 3-8-2023😃😃to my adress

[Spad Driver]

Okay, so we have to wait a bit longer.
Still not going to be all sour grapes about the delay.

Just found something else to do to prep for the B-25's arrival. Looking at the flight and assembly videos I realized that the cowlings are short the correct number of exhaust stacks for a wright twin cyclone R-2600-92 14 cylinder radial!.

So a 3D printer will be used to make additional exhaust stacks to be glued in the proper locations around the cowling.
👍

[Evan D]

Thanks for the update Tom!

[Tom]

We have a small delay with the USA shipment of B-25. The shipment is in the USA but US Customs flagged it for a random inspection. The inspection will likely take another 7 to 10 days so I'm guessing the B-25 will arrive between August 7th and August 14th. I wish I could nail it down better but it is impossible to figure out how long an inspection will take and when the shipment can hop on a train. I think US Customs just want to see the B-25 first. If you see US Customs agents posing for pictures with the B-25 on Instagram and Facebook in the next few days, you know what happened. 😁 Sorry for the delay. I'd go there and get the shipment myself if it helped!

On the bright side, the B-25 arrived today at our EU location and is in stock !