Originally posted by Scott Larkins
View Post
Announcement
Collapse
No announcement yet.
Official Heng Long 1/16 Scale USA Pershing Battle Tank Discussion Thread
Collapse
X
-
Originally posted by Scott Larkins View PostGot my Pershing 10 days ago. Been slowly putting it together. In all of my research on these tanks, I was expecting that the parts would snuggly fit on the tank. Not so. I don't mind using glue to put the parts on. Actually, I prefer it, as glue is added security, but I was surprised at how loose the parts fit. I'm modding the T26 Pershing, not the M26. Although my research shows that the T26 was still in the Korean war at the beginning besides at the end of WW II. But the one thing that really befuddles me is the specific color it came modeled in. I can't exactly match the color and I've tried several colors I thought were close but once they dry, the paint still doesn't match. I've been using the paint to patch up the spots where the part came off the spur. Can anyone recommend a brand and color, or should I just paint the entire thing over? I don't mind painting it but small patching is easier of course. Thanks.
I looked at so many different OD paint shades I ended up just throwing a dart though
Comment
-
Thanks guys. I ended up choosing one of my many OD paints. After looking at my choices using natural outdoor light, which we don't get very much this time of year in MI, I picked out a U.S. OD. LOL. Still have a few things to paint and a few more modifications. Hope to put picks up here once I'm done. Anyone got a good source of 1/16 tank decals? Not thrilled with the "Snow Leopard" decals if I can find some other choices. Thanks.
Comment
-
Originally posted by skyowa View PostMy Pershing shipped today, and according to the tracking, will be here tomorrow, just need the Abrams to complete the US collection, although the Challenger does attract my attention and I've nothing against the crown...
I got an IDF Merkava Mk4 last month. It is the best Heng Long tank I ever acquired, bar none. My next tank is most likely a Tongde Centurion Mk5. It would be a while before I get another US tank.
Comment
-
Originally posted by keilau View PostMy most favorite US tank is the M60 Patton. I have the Pershing and the Sherman. I am a long from a US collection, missing M1A2 Abrams, M2 Bradley and Walker Bulldog, and the soon to be released Stuart.
Comment
-
Originally posted by skyowa View Post
I have the Bulldog, ordered the Sherman and Pershing, can't find a Patton from any brand I've heard of, but if Heng Long spits out a Stuart it will be on my list
I got the plastic version and did the metal upgrade myself. I have the US Marine M60A1. Rubicon99 did an excellent review on the US Army M60A3 tank.
TD M60 A3 review. - Hobby Squawk RC Forum for Airplanes, Boats, Cars, Helicopters, Tanks, and TrucksFinally got in a metal version TD M60A3. Unfortunately things are not starting off well. It arrived with a broken main gun mount, broken rear engine exhaust panel and jammed left side gearbox. On a positive note the gears are steel and the gearboxes are all have bearings. Also the arrangement is the same as used in HL
Comment
-
Got my Pershing today, everything perfect except for a weirdness in the turret, initially didn't go past 3 o'clock, and made a somewhat concerning noise turning right, and when I had support on the phone it started turning as it should but was still making the noise. Guess I'm going for a look when I get off work but other than that, it's a pretty sweet tank.
Comment
-
The most likely cause of turret binding with noise is the wires inside have jammed in the rotation gear. There is a "clutch" mechanism that keeps the turret from turning if there is a bind. It'll make a grinding noise. If so, it'll have to be opened up to clear them.Twenty six tanks, and not done yet!
- Likes 2
Comment
-
well I opened it up, didn't see any wires hitting the ring gear, although I will say the wiring in my bulldog is much neater,, the bundle of wires coming from the turret does not impress the way it's routed, that's going to have to be addressed, but as far as I can tell the issue lies in the drive gear/motor assembly.
Comment
-
Originally posted by quitcherbitchen View PostI think if you disassemble it (rotation gear box) you will find the gear on the motor just needs to be pushed out some to mesh better with the other gears.
Comment
-
Originally posted by skyowa View Post
I'd rather just replace the assembly since it's a brand new tank under warranty, once things are out of warranty then I'll boldly go forth
Comment
-
Originally posted by Rubicon99 View Post
Since they are replacing it are they having you send it back? If not, then there is no harm in opening it up and messing around with the gears. It's a stupidly simple design and easy to take apart and mess around with.
Comment
-
Originally posted by skyowa View Post
I don't know what they're going to do, I opened a ticket and provided the video, haven't heard from them yet, if they just replace it then yeah, we'll open it open and see what's going on, be nice if I could find diagrams for these assemblies though, I like to know what to expect.
- Likes 1
Comment
Comment