Share Your Pics and Videos for the Live Show

[Hugh Wiedman]

Mate got some glamour shots of the thrust vectored freewing avanti this morning. Experimenting with li-ion packs, this was a 14 minute flight lol

I've always loved the repaint you did on the Avanti since you first showed it off, outstanding. :first_place: But until now (not sure how I missed it earlier ), I didn't realize you had added a thrust vectoring unit on it, it must fly incredibly well. What did you use for the TV unit and do you have any "installation" photos of it?

[BikerPatriot]

Hey James, Thank you for the kind words and acknowledgments with regard to my modified Spitfire. I built it from August-December 2018. It is meant to replicate a Seafire F.45 variant which is basically a 'navalized Mk.21 Spitfire'. I did not modify the fuselage nose profile to match the Griffon engine, though I did mod the wing tips to match the updated profile adopted for the Mk XV wing plan and added a couple degrees of washout. I 'pointed up' the rudder and added 3/4" to the aft portion to increase the overall area and sanded in the stressed skin look. I added 3D 'signal lights' similar to Mustangs and Corsairs, which were typical for the variant. I also designed and 3D printed the longer spinner, cable guard for the tail wheel, a pitot tube, strut/rudder tie downs, and additional cockpit details, etc. I used the Flightline cockpit resin printed 3D parts as my inspiration to continue with a few more parts. It flies incredibly well, but a bit rudder sensitive, go figure. So there you have it, another modded Flightline Spitfire, a great MotionRC model of the most beautiful silhouette in aviation. Best as always, LB

beautiful details!

[BikerPatriot]

BikerPatriot She's sweet. Love that livery. Bravo Zulu. Sir. Best, LB

Thanks brother....I love to honor the past.

[mshagg]

Mate got some glamour shots of the thrust vectored freewing avanti this morning. Experimenting with li-ion packs, this was a 14 minute flight lol

[BluesDragon]

Well look what arrived at my door this evening!

Took about, oh.. maybe 3 minutes to unbox and fill. Unboxing video to follow soon.
Fit and finish is absolutely amazing! The livery is second to none.. stunning colors.
CG is spot on at about 7/8ths full. Any more and it becomes tail heavy. Otherwise...

... I freaking love it!

[Elbee]

BikerPatriot She's sweet. Love that livery. Bravo Zulu. Sir. Best, LB

[BikerPatriot]

How about a Nexa Spitfire I am working on :) I know get it outside!
James but I am working on it brother....lol More to come!

[Airguardian]

And some more cool F-18 videos with the new livery!

[Ashle roachclip]

https://www.youtube.com/watch?v=LlEAgp5EMqU The Captain Mike F-16 90mm FW!

[Airguardian]

It's been long in coming... but finally!

PS: Had to reupload the video but it's back online!

[F106DeltaDart]

A few photos of my Roban 500 Apache and Rotorscale 450 Huey in the air at IRCHA last week.

[Icarus the 2nd]

Hi James & the MRC team,

2 weeks ago my good friend Frank from Germany and myself visited pilot Robert on his home field in Germany. The day after, Frank and I attended a closeby EDF meeting in Belgium. Here's a vid showing one of his Avanti flights. His jet is blazingly fast because of the 8S upgrade. Enjoy the vid!

[Elbee]

Hey James, Thank you for the kind words and acknowledgments with regard to my modified Spitfire. I built it from August-December 2018. It is meant to replicate a Seafire F.45 variant which is basically a 'navalized Mk.21 Spitfire'. I did not modify the fuselage nose profile to match the Griffon engine, though I did mod the wing tips to match the updated profile adopted for the Mk XV wing plan and added a couple degrees of washout. I 'pointed up' the rudder and added 3/4" to the aft portion to increase the overall area and sanded in the stressed skin look. I added 3D 'signal lights' similar to Mustangs and Corsairs, which were typical for the variant. I also designed and 3D printed the longer spinner, cable guard for the tail wheel, a pitot tube, strut/rudder tie downs, and additional cockpit details, etc. I used the Flightline cockpit resin printed 3D parts as my inspiration to continue with a few more parts. It flies incredibly well, but a bit rudder sensitive, go figure. So there you have it, another modded Flightline Spitfire, a great MotionRC model of the most beautiful silhouette in aviation. Best as always, LB

[Airguardian]

[Ignacio Vera]

I've only this good photo

[Guy Ricken]

Hi MRC, All,

Found some photo's of my Avanti.....amount of flights on this bird...jeezzzz, uncountable ;-)
Love the freak'n thing.

[James]

Nice job Rich81! She certainly a fun one to fly

[Rich81]

James/MRC

I got the chance to show my new 70mm F-16 fuselage some love:
-a touch of new decals, mixed with
-hand-painting (paint pens)
-3-D printed rails.

I know this is not the newest thing out but she's one of my newest and I am absolutely LOVING how she flies. Thank you for this bird!

[Hugh Wiedman]

Hi James & MRC team,
I had a really nice weekend in Germany flying together with friends
Here's a vid of pilot Robert (Jet and Wings) flying some high alpha on his Freewing Mirage with a nice centerburner!

Enjoy the vid!

Nice flight, cool high alpha and great landing! Holy Cow, flying through those wind turbines must get exciting, and some of us complain about a few stationary trees, light poles or basketball hoops!

[Icarus the 2nd]

Hi James & MRC team,
I had a really nice weekend in Germany flying together with friends
Here's a vid of pilot Robert (Jet and Wings) flying some high alpha on his Freewing Mirage with a nice centerburner!

Enjoy the vid!