300 results in 0.0172 seconds.
-
The first thing I did today was to take some better photos of the RC wheel hubs I'm modifying. Here's some images and a video to explain what's being...
-
Good morning everyone!!!
The last image I posted yesterday night, the hub wasn't deburred, and it's not the best image. Last night, I measured across...
Leave a comment:
-
Hi Guy's
I picked up a used Mig 29 that has never been flown it has the 9 Blade motors. The hardware appears to be the upgraded linkages...Leave a comment:
-
Thanks Evan fixed the error. I saw you had a Mig 29 while back.
I'll try the LHIV ion the old Hobbyking ESC see the Amp draw and thrust output....Leave a comment:
-
Sounds like a Mig29 to me.
I'm not a fan of SMC but am a fan of HV batteries and I would use lighter batteries.
The FreeWing...Leave a comment:
-
Found an easy access to motor power wires. All good...Leave a comment:
-
I turned two hubs to fit into AHHQ's wheel. The diameter the hub is turned to, fits against the inside face of the kit wheel. Each step molded into the...
Leave a comment:
-
Rex if U r using as3x I found fat guy flys. About the best to learn. Still watched it over and over .. Many options flight modes. Or...Leave a comment:
-
Here's the arbor in the lathe.
...Leave a comment:
-
The hex is finished, and now I'll drill and thread the hole.
The arbor is finished, after deburring, it can be used in the...Leave a comment:
-
Actually, I'll share what I've been doing today as I began to modify an RC wheel to mate with Andy's HHQ kit wheels. Here's a video of a hexagon arbor...
Leave a comment:
-
Well I'm getting my P-47 switched over to my new Spektrum 8+ radio after removing my Futaba rec. And want to get the C/G correct. The manual states 90-95mm...Leave a comment:
-
P-38 Prop rotation
I just watched the assembly video. The staff made it clear the props are to rotate outwards. Mine rotate inwards. Came that way from factory. Getting... -
First of all, thank you very much Tdriver113 for checking out this stalled build I began in August of 2025. I actually didn't think I'd do a build thread...Leave a comment:
-
Depends on how the contract spelled it out. WWII pioneer tools came raw wood and painted both. Same with post war all the way through current time....Leave a comment:
-
Yes.Leave a comment:
-
The video linked above has unfortunately disappeared. I'm thinking of just cutting off the existing strut and fitting the new unit on the shaft. Has anyone...Leave a comment:
-
Got seven (7) flights in on my EFlite 1.5M P-51D "Trainer" this morning. Landings are not a problem, and once the plane is in the air, it is...Leave a comment:
-
Today I try again. It's worked . HL 6.0 radio to Haya TK-6.3 board . Thank you ....Leave a comment:
-
Battery adapter
Is it okay to use a parallel adapter for the Fliteline P-38L?
I have a couple of 5000mAh 4 cell lipos but no 2500mAh 4-cell lipos... -
I ran into the same tire and wheel problem with my Vietnam gun truck project. I think an accurate military wheel and tire producer could make a good ...Leave a comment:
-
Binding plug what two pins are connected 1an3?Leave a comment:
-
And so, the first two post today are new, and now, I'll share more of the build from 2025 to get what I've done up to date....
Leave a comment:
-
Here are the RC Tires/Wheels I've bought for this conversion. The way oversized wheels will be modified to mate with the kit wheels as I mentioned. Images...
Leave a comment:
-
OK, so after looking at Tangs Andy's HHQ M8 RC conversion, and asking if the 3DP tires had enough traction, I'll modify the over sized hex drive wheels...
Leave a comment:
-
Ahhhhhh!!! Now I understand!!! You know David, you still have to create a platoon of Scout vehicles. It could consist of some M8 Greyhounds, M5 Stuarts,...Leave a comment:
-
The door handle is mounted in the wrong location on the door instead of the ramp. I drilled a new hole a size smaller than the pin to give a good press...
Leave a comment:
-
It looks great David!!! Carlos has done a great job 3D Printing the M8 Greyhound. I wonder how much one would cost??? I know there so many free 3DP files...Leave a comment:
-
Coming up on 8 months now.
When are V2 wings going to be available for retrofitting to the V1?...Leave a comment:
-
Great news. This all seems like it’s been relatively recent updates here - just last month - and to be honest I’ve held off on one of these projects...Leave a comment:
Leave a comment: