Grossman56,
My high rate is 18mm, middle rate is 15mm and my low rate is 9mm up/down. Take-off will be on low and I can switch up if need be....
108 results in 0.0077 seconds.
-
I have a question; I purchased a Blue Angels version in early 2025 and I’m assuming the elevators had 17g servos then they were out of stock…I purchased...Leave a comment:
-
I set my Great Planes CG machine to 78mm and added some more weight. Went rummaging through the parts bins and found this little nose cap which, along...
Leave a comment:
-
Once I get the C/G correct and a little nose heavy I will fly it again. I know I can control with down stick on the elevator if needed. I will set my...Leave a comment:
-
the opel is appearing on AlieExpress
Keep in mind the price is in CAD not USD
For some reasons when i swithc to USA as destination (and USD...Leave a comment:
-
Hello Rex and Grossman yes I am trying to hit the CG recommended by the instructions. Jut trying to be a little nose heavy to be on the safe side. My...Leave a comment:
-
Hi guys:
One other thing I want to check is the P factor, does she tend to pull to the left when taking off? Some pull is to be expected but if...Leave a comment:
-
Randy, thanks for joining in. All of us working together will get this flying well. I feel it is a great little plane, and we just need to get the short,...Leave a comment:
-
Panzer IV arrived today, battery getting charged and then a run down and back in and out up and down a few bang bangs. Can't do much more, getting ready...Leave a comment:
-
First of all I appreciate all the comments on this model it was very helpful. I balanced the model on my great plains balancer to get the proper CG. Put...
Leave a comment:
-
Increasing Foam Model Durability
Using Water Based Polycrylic to Increase Durability of Foam Models.
Avoiding Clear plastic like Running Lights and Clear Canopy Covers.
Be... -
Grossman56,
I hadn't thought of that, you might be on to something. Might be why the added instructions to align the elevator were added. I'll...Leave a comment:
-
Okay, here's what I get from the build video. The two screws that hold the vertical and horizontal stab in place. Is it possible that having the front...Leave a comment:
-
Grossman56,
I'm using the Admiral 2200 45c recommended battery. I am back in the hanger re-balancing after the first 2 flights. I will remove the...Leave a comment:
-
I can pick up 2 oz. by using a 3000 4s but it right on the supposed CG so it's not going to help much.
I tried to find the lead weights on MRC,...Leave a comment:
-
Hmm, good to know, I may have to add even some more, the cowl ring is hollow and might be a good place to start.
Are you using a bigger battery...Leave a comment:
-
Yep the salt trick, it looks awesome. What I should do is shoot a video with the next prop I do.
I have one sitting there and a spare would be...Leave a comment:
-
The suspension has been upgraded to metal axles, gears, and drive shafts. The motor was changed to a 370 with 2 speed gearbox, and the steering servo...Leave a comment:
-
Wuzzap, AreS pilots!?
This thread is so dead, it's only been me posting videos for a while, now! :')
...Leave a comment:
-
Good clarification. It's only the HL 6 and 7 series that you can get away with this!Leave a comment:
-
The older 5.3 and RX-18 based tanks where the switch was on the bottom were current carrying as there is no slot on those boards for a dedicated switch...Leave a comment:
-
To chime in; the Heng Long on/off switch is not current bearing, and I've found that a momentary switch will activate it. On some tanks I battle roughly,...
Leave a comment:
-
Yes, That's the one I have and goint to use in Avanti (that's why I'm going to order the ARF+ version)Leave a comment:
-
Official Rotorscale MH-6 Little Bird 180 Size Gyro Stabilized Helicopter RTF Thread
MH-6 Little Bird 180 Size Gyro Stabilized Helicopter - RTF from Rotorscale - RSH1030-001
The MH-6 Little Bird has carried... -
Leave a comment:
-
There seems to be some discrepancy on the thrust numbers. I don't believe they use LiHV for their numbers and I doubt it's "real world" thrust....Leave a comment:
-
SaWeeeeTT...Leave a comment:
-
Damn Dan, looks almost real, especially since each has that "Dangerous Dan" scale touches.
Leave a comment:
-
Very Nice!
...
Leave a comment:
-
I installed ProModeler servos in the horizon
tal stabs on both my F18's. Smooth as butter and on 8S possibly even a better idea....
Leave a comment:
Leave a comment: