.png)
122 results in 0.0068 seconds.
-
So I got the 8S setup. Anyone having issues with CG? I’m using two 5200 SMC 4s batteries and this bird is nose heavy using the wood pieces included... -
First of all, your F-16 has flaps???? Or do you mean "flaperons"?
Next, the Admiral RX600SP doesn't have "SAFE" as such. It...Leave a comment:
-
Ok, keep us advised, I'm sure there will be interest and questions....Leave a comment:
-
Banggood advertises it at $139 USD, shipping included. I bought my first M5 Stuart from there, but can't remember he actual seller. However, I'm told...Leave a comment:
-
Grossman 56,
I was thinking the same thing about the cowl. I'm going to measure it and if it gets torn up, I can make a new one from balsa or...Leave a comment:
-
Admiral RX600SP
Admiral RX600SP. SAFE cannot be used in landing. The flaps on my F16 act jerkily in SAFE mode, AS3X is fine... ailerons retract downward a bit with T.O.... -
I have to set my gyro up this weekend, I'll post a breakdown of how I did it. If usually have the gain set to the knob so I can increase or decrease...Leave a comment:
-
I imagine my L7 would fit for those wishing to make a Tiran conversion. I think those have some added armor and boxes, I’m not sure yet....Leave a comment:
-
Hi Rich, are you planning to develop/offer any aftermarket upgrades like you do for the M60?Leave a comment:
-
I forgot what price I saw it being sold overseas maybe the $100 range or less? It'll be interesting to see what they jack it up to over here....Leave a comment:
-
Bought the Nexa/VQ A6M kit in Oct 26, electric power. Thought I would comment on a problem, depending on how you transport the model. The openings...
Leave a comment:
-
They won’t ship to US, that’s why it’s unavailable.
Any idea on a US price yet?
I really hope it’s a good quality because the JJRC...Leave a comment:
-
I'll have more time to look at it when I get back from my trip. I'll check all the connections then.Leave a comment:
-
The lack of sound, did you fiddle with the volume knob up or down at all?
But lack of muzzle flash and sound could be a plug loose or mis-plugged...Leave a comment:
-
Barrel recoils but no sound nor flash. No initial factory smoke shows.Leave a comment:
-
You'll need to remove the servo to see the servo model number on the side, then match that number in the parts section for its description...Leave a comment:
-
Grossman56,
My high rate is 18mm, middle rate is 15mm and my low rate is 9mm up/down. Take-off will be on low and I can switch up if need be....Leave a comment:
-
I have a question; I purchased a Blue Angels version in early 2025 and I’m assuming the elevators had 17g servos then they were out of stock…I purchased...Leave a comment:
-
I set my Great Planes CG machine to 78mm and added some more weight. Went rummaging through the parts bins and found this little nose cap which, along...
Leave a comment:
-
Once I get the C/G correct and a little nose heavy I will fly it again. I know I can control with down stick on the elevator if needed. I will set my...Leave a comment:
-
the opel is appearing on AlieExpress
Keep in mind the price is in CAD not USD
For some reasons when i swithc to USA as destination (and USD...Leave a comment:
-
Hello Rex and Grossman yes I am trying to hit the CG recommended by the instructions. Jut trying to be a little nose heavy to be on the safe side. My...Leave a comment:
-
Hi guys:
One other thing I want to check is the P factor, does she tend to pull to the left when taking off? Some pull is to be expected but if...Leave a comment:
-
Randy, thanks for joining in. All of us working together will get this flying well. I feel it is a great little plane, and we just need to get the short,...Leave a comment:
-
Panzer IV arrived today, battery getting charged and then a run down and back in and out up and down a few bang bangs. Can't do much more, getting ready...Leave a comment:
-
First of all I appreciate all the comments on this model it was very helpful. I balanced the model on my great plains balancer to get the proper CG. Put...
Leave a comment:
-
Increasing Foam Model Durability
Using Water Based Polycrylic to Increase Durability of Foam Models.
Avoiding Clear plastic like Running Lights and Clear Canopy Covers.
Be... -
Grossman56,
I hadn't thought of that, you might be on to something. Might be why the added instructions to align the elevator were added. I'll...Leave a comment:
-
Okay, here's what I get from the build video. The two screws that hold the vertical and horizontal stab in place. Is it possible that having the front...Leave a comment:
-
Grossman56,
I'm using the Admiral 2200 45c recommended battery. I am back in the hanger re-balancing after the first 2 flights. I will remove the...Leave a comment:
Leave a comment: