What models would you like to see made in the future ???

[fhhuber]

I think the technical issues involved in six pusher motors and 4 pod-mounted DFs in one plane are beyond reasonable mass-production capabilities. At least within any reasonable price point...

I would like to enter the third vote for an He-111. You just don't see those very often modeled... oh, and the bigger, the better (2m minimum).

Typical way to model the B-36 is to turn the props (sometimes just 2 powered with 4 freewheeling) for power and hang the dummy turbine nacelles for looks.

We get far higher power:weight than the full scale with ease.

They tacked on the jet engines for the B-36 when they found out it couldn't carry a full bomb load to desired operational altitude on the power of the props. (and the extremely long takeoff run fully loaded wasn't very practical either)

[Bearcat]

Typical way to model the B-36 is to turn the props (sometimes just 2 powered with 4 freewheeling) for power and hang the dummy turbine nacelles for looks.

We get far higher power:weight than the full scale with ease.

They tacked on the jet engines for the B-36 when they found out it couldn't carry a full bomb load to desired operational altitude on the power of the props. (and the extremely long takeoff run fully loaded wasn't very practical either)

Here is another way...

[Mad Baron]

I still like the idea of the B-36. It would be quite a site to see at the flying field!

[Mad Baron]

How about a C-130? Make it where the rear cargo hatch would open and release some paratroopers or cargo.

[crxmanpat]

A friend of mine scratch built a 3700mm (that's 12 feet for us Imperialists) B-36D using just six Suppo 22mm motors, and dummy jet pods. It flies great! I'm sure a 2200mm or so version would not be hard or expensive to do.

[Twowingtj]

A friend of mine scratch built a 3700mm (that's 12 feet for us Imperialists) B-36D using just six Suppo 22mm motors, and dummy jet pods. It flies great! I'm sure a 2200mm or so version would not be hard or expensive to do.

That would be very cool. At that size, or bigger hint hint, it would be grass friendly too!:)

[yorkiepap]

I see a couple of other hungry pilots would love a Cessna 337 Skymaster, a Beech 18D, & the Dornier Do335 Arrow. 1400>1700mm W/S. I'd jump all over any one or all three of these.

Denny

[Bearcat]

I see a couple of other hungry pilots would love a Cessna 337 Skymaster, a Beech 18D, & the Dornier Do335 Arrow. 1400>1700mm W/S. I'd jump all over any one or all three of these.

Denny

X2 Dornier Do335 Arrow!!!

[fhhuber]

I hope whatever they offer, they will offer a BARE FOAM (no paint or decals applied) version.

Save a little on manufacturing cost and save those of us wanting to custom paint a lot of paint stripping.

[Ablecat]

Please please please can we have a 78 inch wingspan Lockheed constellation? You could use many aspects from the B-24 such as motors ESC‘s to cut costs. I always fill the lucky constellation was one of the most beautiful aircraft ever made I would love to have one made by you boys.

[F22trainer]

Convair 240/340 in USAF trim
C-119 Flying Boxcar (Flight of the Phoenix)

[rifleman_btx]

A larger hellcat.

[Goji89]

Beechcraft Kingair!

[Shirty]

I just need a nice 109 around 1600mm. ;)

[Knuckledragger]

How about The Canadian Avro Arrow that never did go into production past the test stages

[Dauntless]

A largish classic propeller twin would be nice. The Beech 18 has already been mentioned. Along similar lines, what about a Cessna T50 Bobcat; or an Airspeed Oxford; or even an Avro Anson,

On the warbird front - I'd love to see a 1700mm Douglas SBD5 Dauntless with working flaps, dive brakes, retracts, and bomb-drop!

[F106DeltaDart]

A largish classic propeller twin would be nice. The Beech 18 has already been mentioned. Along similar lines, what about a Cessna T50 Bobcat; or an Airspeed Oxford; or even an Avro Anson,

Along the same lines, a Grumman Goose would also be a fantastic choice.!

[fhhuber]

Airliners, classic and rarely seen: Ford Trimotor.

And the guys who love the deep panel lines in their molds should love it. Its covered in corrugated metal. Its ALL panel lines.

[E-Challenged]

Maybe it's my age (79) but along with all the "me-too" prop and EDF warbirds, would like to see more golden age and later civilian aircraft. Examples: Ryan Navion, Ercoupe, Bellanca Cruisair, Fleet Biplane, Red Baron Pizza Super Stearman Biplane.

[Hippie 64]

I would like to see something that I didn't have to spend a $100 just to put in one , 1, however you want to word it , battery in to fly !!!!!!!!! Much less think of doing it more than once in the same trip to the field


Bryan